need help with usb cable

[tkrabec at gmail.com (Tim Krabec)]

it looks like there are only 2 wires in the pic of the 3.5mm pin, what
happens if it is plugged in backwards, anything bad?, if not don't worry and
just locate the colors, solder them to the new adapter, and be done with it

On Fri, Dec 5, 2008 at 2:34 PM, Robin Wood <dninja at gmail.com> wrote:

> 2008/12/5 Tim Krabec <tkrabec at gmail.com>:
> > I over simplified the problem it's a USB -> Serial converter
> > However if the pinout on the on the other side of the cable You can just
> > test it from the 3.5mm jack side and find the color cables for the pins.
>  IE
> > just look at it from the other end of the cable.
>
> You mean find the spec for the 3.5mm jack and then work out which
> colour is connected to which bits of the jack. Sounds good, I'll try
> to find the spec.
>
> Robin
>
> > --
> > Tim Krabec
> > Kracomp
> > 772-597-2349
> > smbminute.com
> > kracomp.blogspot.com
> > www.kracomp.com
> >
> > _______________________________________________
> > Pauldotcom mailing list
> > Pauldotcom at mail.pauldotcom.com
> > http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
> > Main Web Site: http://pauldotcom.com
> _______________________________________________
> Pauldotcom mailing list
> Pauldotcom at mail.pauldotcom.com
> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
> Main Web Site: http://pauldotcom.com



-- 
Tim Krabec
Kracomp
772-597-2349
smbminute.com
kracomp.blogspot.com
www.kracomp.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.pauldotcom.com/pipermail/pauldotcom/attachments/20081205/d548a31e/attachment.htm