PaulDotCom mailing list archives

need help with usb cable


From: cgerlingjr at gmail.com (Chris Gerling)
Date: Fri, 5 Dec 2008 16:07:02 -0500

I'd honestly love to get into this stuff but my color-blindness would
probably make me go insane :)

Chris Gerling Jr.
Web:  http://www.chrisgerling.com
Podcast:  http://www.hak5.org | http://www.securabit.com




On Fri, Dec 5, 2008 at 2:36 PM, Robin Wood <dninja at gmail.com> wrote:

2008/12/5 Larry Pesce <larry at pauldotcom.com>:
Yeah, unfortunately, it will affect it. :-(  The "stuff" in the middle,
is at a minimum a TTL level shifter.  Pry that bad boy open and trace
the pinout to the chip specs  :-)

It feels like it has just been sealed in rubber, it isn't a nice
plastic case unfortunately.

Or pick up an FTDI cable form LadyAda...

I'll give Tims idea a go and if not then I'll have a look at LadyAda.

Robin


- L





Robin Wood wrote:
2008/12/5 Tim Krabec <tkrabec at gmail.com>:

Relatively simple
look at the diagram here http://pinouts.ru/Slots/USB_pinout.shtml
then use your multimeter to check continuity on the pins to the
existing
cable and you'll be able to tell which wire goes to which pin, then
you're
set.


I should have added, there is a bit of circuitry in the cable as well
that does come conversion - all I know is voltage dropping. Not sure
if that will affect it but I'll certainly give it a go.

Robin
_______________________________________________
Pauldotcom mailing list
Pauldotcom at mail.pauldotcom.com
http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
Main Web Site: http://pauldotcom.com

_______________________________________________
Pauldotcom mailing list
Pauldotcom at mail.pauldotcom.com
http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
Main Web Site: http://pauldotcom.com

_______________________________________________
Pauldotcom mailing list
Pauldotcom at mail.pauldotcom.com
http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
Main Web Site: http://pauldotcom.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.pauldotcom.com/pipermail/pauldotcom/attachments/20081205/8a00fb8d/attachment.htm 


Current thread: