nanog mailing list archives
Re: Muni fiber: L1 or L2?
From: Jay Ashworth <jra () baylink com>
Date: Sat, 9 Feb 2013 10:22:19 -0500 (EST)
----- Original Message -----
From: "Masataka Ohta" <mohta () necom830 hpcl titech ac jp>
Robert E. Seastrom wrote:Let's assume 4:1 concentration with PON.Why on earth would we assume that when industry standard is 16 or 32?That is because additional 4:1 concentration is usually at CO, which does not contribute to reduce the number of fibers in a trunk cable.
Not to my understanding.
16 is a safe number.Do you mean a splitter in field should be shared by 16 subscribers?
He means that, yes.
Then, with the otherwise same assumptions of my previous mail, total extra drop cable length for PON will be 204km, four times more than the trunk cable length. Thus, it is so obvious that SS is better than PON.
Nope. We're all looking at you funny because your math seems *exactly* backwards. Let me plot it for you. Assume 100m from the access mux (OLT) to the ONT: 2M from the OLT to the CO patch 73M from the CO patch to the neighborhood pedestal 25M from the pedestal to each house (assume a spherical neighborhood). So, if we put the splitter in the pedestal, splitting 16 houses, we get 2 + 73 + (25 * 16) = 475 meters of total glass, plus 1 16:1 splitter. If we put the splitter in the CO (which I believe is what you mean by "SS"; we call it "home-run" fiber), you get: 2 + ((73 + 25) * 16) = 1570 meters of total glass, optionally plus 1 16:1 splitter, if you're still doing PON, instead of AE. So, over three times as much fiber if you're not putting the splitter in the field, which is... the opposite of what you assert? Or am I dense? Cheers, -- jra -- Jay R. Ashworth Baylink jra () baylink com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA #natog +1 727 647 1274
Current thread:
- Re: Muni fiber: L1 or L2?, (continued)
- Re: Muni fiber: L1 or L2? Robert E. Seastrom (Feb 09)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 09)
- Re: Muni fiber: L1 or L2? Jason Baugher (Feb 09)
- Re: Muni fiber: L1 or L2? Robert E. Seastrom (Feb 09)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 09)
- Re: Muni fiber: L1 or L2? Warren Bailey (Feb 09)
- Re: Muni fiber: L1 or L2? Jason Baugher (Feb 09)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 10)
- Re: Muni fiber: L1 or L2? Jason Baugher (Feb 10)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 11)
- Re: Muni fiber: L1 or L2? Jay Ashworth (Feb 09)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 09)
- Re: Muni fiber: L1 or L2? Jason Baugher (Feb 08)
- RE: Muni fiber: L1 or L2? Eric Wieling (Feb 06)
- RE: Muni fiber: L1 or L2? Eric Wieling (Feb 06)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 06)
- Re: Muni fiber: L1 or L2? Jean-Francois Mezei (Feb 06)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 06)
- Re: Muni fiber: L1 or L2? Jay Ashworth (Feb 05)
- Re: Muni fiber: L1 or L2? Stephen Sprunk (Feb 10)
- Re: Muni fiber: L1 or L2? Stephen Sprunk (Feb 10)