nanog mailing list archives
Re: Muni fiber: L1 or L2?
From: Jean-Francois Mezei <jfmezei_nanog () vaxination ca>
Date: Mon, 04 Feb 2013 16:17:35 -0500
On 13-02-04 16:04, Scott Helms wrote:
Subscribers don't care if the hand off is at layer 1 or layer 2 so this is moot as well.
This is where one has to be carefull. The wholesale scenario in Canada leaves indepdendant ISPs having to explain to their customers that they can't fix certain problems and that they must call the telco/cableco to get it fixed. (in the case of a certain cable company, they can't even call them, it has to be done by email with response of at least 48 hours). So splitting responsabilities can be an annoyance if it becomes very visible to the end users. Another aspect: customers espect to be able to switch seamlessly from one ISP to the next. But ISP-2 can't take over from ISP-1 until ISP-1 has relinquised control over the line to the end user. In a layer 1 scenario, it means ISP-1 has to physically go and deinstall their CPE and disconnect strand from their OLT, and then ISP-2 can do the reverse and reconnect evrything to provide services. What happens when ISP-1 isn't interested in a quick disconnect and ISP-2 has to wait days/weeks with end use without service ? In a layer2 service, it is a matter of reconfiguring the OLT to pass ethernet packets to a different VLAN to a different ISP. No physical changes required and it can be almost tranparent to the end user who just has to make a new DHCP request and be provisioned by ISP-2.
Current thread:
- Re: Muni fiber: L1 or L2?, (continued)
- Re: Muni fiber: L1 or L2? Owen DeLong (Feb 03)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 03)
- Re: Muni fiber: L1 or L2? Mark Andrews (Feb 03)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 03)
- Re: Muni fiber: L1 or L2? Owen DeLong (Feb 03)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 03)
- Re: Muni fiber: L1 or L2? Owen DeLong (Feb 03)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 03)
- Re: Muni fiber: L1 or L2? Owen DeLong (Feb 03)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 04)
- Re: Muni fiber: L1 or L2? Jean-Francois Mezei (Feb 04)
- Re: Muni fiber: L1 or L2? Jay Ashworth (Feb 04)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 04)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 04)
- Re: Muni fiber: L1 or L2? Jay Ashworth (Feb 04)
- Re: Muni fiber: L1 or L2? Masataka Ohta (Feb 04)
- Re: Muni fiber: L1 or L2? Owen DeLong (Feb 04)
- Re: Muni fiber: L1 or L2? Stephen Sprunk (Feb 10)
- Re: Muni fiber: L1 or L2? Owen DeLong (Feb 04)
- Re: Muni fiber: L1 or L2? Scott Helms (Feb 04)
- Re: Muni fiber: L1 or L2? Jay Ashworth (Feb 05)