nanog mailing list archives

RE: BGP from Juniper to Cisco ASR

From: Eric Dugas <EDugas () zerofail com>
Date: Wed, 18 Dec 2013 16:09:31 +0000

Probably a TTL problem. Did you configure ebgp-multihop?

Eric Dugas
ZEROFAIL / AS40191
edugas () zerofail com

-----Original Message-----
From: Philip Lavine [mailto:source_route () yahoo com] 
Sent: December 18, 2013 10:48 AM
To: NANOG list
Subject: BGP from Juniper to Cisco ASR

Dec 18 07:46:33: %BGP-3-NOTIFICATION: received from neighbor <REMOTE PEER> active 2/5 (authentication failure) 0 bytes 
Dec 18 15:46:33.615: BGP: ses global <REMOTE PEER> (0x7FB1CD209CF0:0) act Receive NOTIFICATION 2/5 (authentication 
failure) 0 bytes 

Although I have seem this on the message boards I am little confused in that the ISP is telling me that there is no 
authentication enabled on the Juniper and I do not have authentication enabled on the ASR. So what is going on here?

Current thread:

BGP from Juniper to Cisco ASR Philip Lavine (Dec 18)
- Re: BGP from Juniper to Cisco ASR Pedro Cavaca (Dec 18)
- Re: BGP from Juniper to Cisco ASR Eric A Louie (Dec 18)
- Re: BGP from Juniper to Cisco ASR Eric A Louie (Dec 18)
  - Re: BGP from Juniper to Cisco ASR Rakesh M (Dec 18)
    - Re: BGP from Juniper to Cisco ASR Philip Lavine (Dec 19)
- RE: BGP from Juniper to Cisco ASR Eric Dugas (Dec 19)
  - Re: BGP from Juniper to Cisco ASR Philip Lavine (Dec 18)