nanog mailing list archives
RE: Juniper hardware recommendation
From: Michael Fiumano <mfiumano2 () gmail com>
Date: Fri, 14 May 2021 13:06:09 -0400
If accurate interface stats are important to you, MX’s don’t support accurate SNMP Interface Utilization, ie they don’t comply with RFC2665/3635, which seems like a fairly basic thing to do but they decided not to, and has been impactful to me in the past. So, any SNMP monitoring of an interface will always show less utilization than what is actually occurring, possibly leading to a false sense of security, or delay in augmentation. Would also affect usage based billing, if you do that. https://www.juniper.net/documentation/us/en/software/junos/network-mgmt/topics/topic-map/snmp-mibs-and-traps-supported-by-junos-os.html For M Series, T Series, and MX Series, the SNMP counters do not count the Ethernet header and frame check sequence (FCS). Therefore, the Ethernet header bytes and the FCS bytes are not included in the following four tables: ifInOctets ifOutOctets ifHCInOctets ifHCOutOctets Thanks, Michael Fiumano *From:* NANOG *On Behalf Of *Mark Tinka *Sent:* Monday, May 10, 2021 10:25 AM *To:* nanog () nanog org *Subject:* Re: Juniper hardware recommendation On 5/10/21 16:19, aaron1 () gvtc com wrote: I prefer MX204 over the ACX5048. The ACX5048 can’t add L3 interface to an mpls layer 2 type of service. There are other limitations to the ACX5048 that cause me to want to possibly replace them with MX204’s. But in defense of the ACX5048, we have gotten some good mileage (a few years now) of good resi/busi bb over vrf’s and also carrier ethernet for businesses and lots of cell backhaul… so they are good for that. I’ve heard the ACX5448 was even better. Trio will always provide better features, but come with the price tag to boot. I’m looking at the MX240 for the SCB3E MPC10E hefty with 100 gig ports You might want to look at the MX10003, in that case, as well. We are deploying those for 100Gbps service (customer-facing). Works out cheaper than offering 100Gbps service on the MX240/480/960 for the same task. Mark.
Current thread:
- Re: Juniper hardware recommendation, (continued)
- Re: Juniper hardware recommendation Mark Tinka (May 08)
- Re: Juniper hardware recommendation Baldur Norddahl (May 08)
- Re: Juniper hardware recommendation Mark Tinka (May 08)
- Re: Juniper hardware recommendation Baldur Norddahl (May 08)
- Re: Juniper hardware recommendation Mark Tinka (May 09)
- Re: Juniper hardware recommendation Mark Tinka (May 10)
- RE: Juniper hardware recommendation aaron1 (May 10)
- Re: Juniper hardware recommendation Mark Tinka (May 10)
- RE: Juniper hardware recommendation Adam Thompson (May 14)
- Re: Juniper hardware recommendation Jason Healy (May 16)
- Re: Juniper hardware recommendation Colton Conor (May 16)
- Re: Juniper hardware recommendation Mark Tinka (May 16)
- Re: Juniper hardware recommendation Jon Lewis (May 16)
- Re: Juniper hardware recommendation Mark Tinka (May 15)
- Re: Juniper hardware recommendation Saku Ytti (May 15)