Re: One NIC on public side

["mike () grounded net" <mike () grounded net>]

Just installed a new XP pro 64bit and am trying what you've suggested, taking all protocols out of nic1 but no data 
what so ever shows up on wireshark when I do this.

On Thu, 13 May 2010 11:43:23 -0500, mike () grounded net wrote:
>  Just wanting to understand what I'm doing. Always good to learn rather than
>  simply being told :).
>  
> >  MS client gets disabled if you disable TCP/IP. QoS can be disabled as
> >  well.
> >  The network monitors can be left on.
> >  
>  Because it is a netbios based service, which rides on tcp/ip?
>  
> >  You are disabling TCP/IP on the public NIC. The LAN NIC will have its own
> >  IP
> >  address, the public one will not. As far as "safely connect" is concerned,
> >  it depends on what you mean by "safely".
> >  
>  Yes, the server has two NICs. I have one connected on the LAN side for
>  server admin, etc, the other is connected to a hub which has the WAN
>  connections coming into it, just before the firewall. I want to see what
>  hits us before the firewall does anything with it. It helps a lot when
>  trying to figure out various problems.
>  
>  What do I mean by safely? Meaning that public cannot gain access to the
>  server in some way. I mean, the setup bypasses the firewall so sure don't
>  want someone being able to gain access into the lan somehow.
>  
>  ___________________________________________________________________________
>  Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
>  Archives:    http://www.wireshark.org/lists/wireshark-users
>  Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>  mailto:wireshark-users-request () wireshark org?subject=unsubscribe


___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe