Re: Error

[Djalal Harouni <tixxdz () opendz org>]

On Thu, Nov 17, 2011 at 03:18:00PM +1100, David Coceancig wrote:
> Hello
>
> Recently we have had some PICA VITA II   printers  which when do a nmap query on.
>
> The ports
> 515 and
> 9100
>
> Show as open on the first scan.
>
> On subsequent scans the port comes up as "filtered"
> These scans are done from the same subnet, so I can only suggest that by querying the port, on the printer, that this 
> query has some how crashed the print server application running on the printer.
> Turning the printer  off and back on, reset the printer so ports were open again.
> This was done from various versions of nmap.
> Last version used was 4.11 running on Redhat Linux
>
> The printer is model
> Pica Vita II  104/8
> Software Version V1.55 Build 2006
Using the '--packet-trace' switch and a high debug level will show you
the packets of your Nmap scan.

-- 
tixxdz
http://opendz.org
_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://seclists.org/nmap-dev/