Re: [EXTERNAL] Juniper configuration recommendations/BCP

[Pierre LANCASTRE <pierre.lancastre () gmail com>]

Hi

https://www.juniper.net/assets/kr/kr/local/pdf/books/tw-hardening-junos-devices-checklist.pdf

http://62.210.157.99/juniperdayone/TW_Hardening_Junos_Devices.pdf

Cheers

Pierre

Le jeu. 8 oct. 2020 à 16:59, Mann, Jason via NANOG <nanog () nanog org> a
écrit :

> If using loopbacks on the router you have to have a firewall filter on it
> to permit traffic to the device even if you have a firewall filter on
> individual interfaces that would allow/deny traffic
>
>
>
> *From:* NANOG <nanog-bounces+jamann=mt.gov () nanog org> * On Behalf Of *Forrest
> Christian (List Account)
> *Sent:* Thursday, October 8, 2020 3:38 AM
> *To:* nanog list <nanog () nanog org>
> *Subject:* [EXTERNAL] Juniper configuration recommendations/BCP
>
>
>
> <ISP hat on>
>
> After nearly 30 years of being a cisco shop, I'm working on configuring
> our first pair of Juniper MX204's to replace our current provider-edge
> cisco.
>
>
>
> I've worked through enough of the Juniper documentation/books to have a
> fairly good handle on how to configure these, but I wanted to check with
> the list to see if there are any Juniper-Specific gotchas I might run into
> that isn't documented well.
>
>
>
> I've done a bit of googling and am either finding stuff that is largely
> Cisco-specific or which is generic - all of which I'm rather familiar with
> based on my past history.   Is there anything I should worry about which is
> Juniper-specific?
>
>
>
> --
>
> - Forrest