nanog mailing list archives
Re: Switch for SFP+
From: "Jörg Kost" <jk () ip-clear de>
Date: Thu, 14 May 2020 09:55:53 +0200
Hello Mauro,the ICX7250-24P-2X10G may fit. 2×10 GbE SFP+, 6x1 GbE, can be licensed for full 8x10G.
Regards Jörg On 13 May 2020, at 20:56, Mauro Gasparini wrote:
Good afternoon. I'm looking for a switch with the following capabilities: . transport for more than 20 gbps . link aggregation LACP . slots for SFP+ . seamlessly when trunking vlans through the link aggregation.And essentially that doesn't exceed US$D 2000 and is compatible with 10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).If any of you have a good experience with a device that meets these requirements (which are minimal with the exception of price and compatibility) ?Regards. Mauro Gasparini
Current thread:
- Re: Switch for SFP+, (continued)
- Re: Switch for SFP+ Mauro Gasparini (May 15)
- RE: Switch for SFP+ Travis Garrison (May 18)
- Re: Switch for SFP+ Mauro Gasparini (May 18)
- Re: Switch for SFP+ Mike Hammett (May 18)
- RE: Switch for SFP+ Dennis Burgess via NANOG (May 18)
- Re: Switch for SFP+ Randy Carpenter (May 18)
- Re: Switch for SFP+ Josh Baird (May 18)
- Re: Switch for SFP+ Mike Hammett (May 15)
- Re: Switch for SFP+ Mauro Gasparini (May 15)
- RE: Switch for SFP+ nathanb (May 14)
- Re: Switch for SFP+ Mauro Gasparini (May 15)