nanog mailing list archives

Re: IP Dslams


From: Jeff Shultz <jeffshultz () sctcweb com>
Date: Fri, 4 Jan 2019 07:06:06 -0800

You might start hunting on the used market for Occam/Calix B6 equipment,
specifically the B6-252 ADSL2+ and POTS card and the 12 slot chassis.

You'll have to put in some supporting infrastructure, but they do work
well, and I know of at least two aftermarket repair places that will repair
them for a reasonable (for the telecom world) cost.

On Fri, Jan 4, 2019, 06:38 Nick Edwards <nick.z.edwards () gmail com wrote:

They don't have a large budget and although I'm yet to get prices on
adtran's (understandable, holidays 'n all) I doubt it will fit within their
budget, it's looking more like getting a few planet dslams and configuring
a linux box as the bng, been 10 years since I've had to do that kind of
setup, memories hazy, but I know it worked, and well, so thanks to all for
suggestions but the adtrans and nokias are not for those on shoe string
budgets, which wouldnt even allow me to include an asr1k for the bng, and
although it would allow for, I'd rather not grab an ebay 7200/7300 :)

On Wed, Jan 2, 2019 at 10:52 PM Brandon Martin <lists.nanog () monmotha net>
wrote:

On 1/2/19 6:47 AM, Nick Edwards wrote:
There are 260 villas, and no coax.

Is there a logical way to distribute the termination?  You might be able
to get better performance (not that you perhaps care, in this case) at
minimal additional cost if you can do building-local termination of each
customer circuit and then backhaul on e.g. bonded VDSL2 or G.FAST over
shorter distances (perhaps hopping building to building).

I'm assuming there's no data grade copper or fiber if there's no coax.
Obviously if you've got those, distributed termination makes even more
sense.

If you do want a centralized solution, an Adtran TA5006 (the small
chassis) with 6x 48 port VDSL2 combo modules (with or without vectoring,
depending on your needs) would do the job (though it fills the chassis
and doesn't allow for expansion, so the full-size TA5000 may be
desirable).  I've played (and am playing with) the same system but with
GPON termination and have been happy with it so far.
--
Brandon Martin



-- 
Like us on Social Media for News, Promotions, and other information!!

   
<https://www.facebook.com/SCTCWEB/>      
<https://www.instagram.com/sctc_503/>      
<https://www.yelp.com/biz/sctc-stayton-3>      
<https://www.youtube.com/c/sctcvideos>













_**** This message 
contains confidential information and is intended only for the individual 
named. If you are not the named addressee you should not disseminate, 
distribute or copy this e-mail. Please notify the sender immediately by 
e-mail if you have received this e-mail by mistake and delete this e-mail 
from your system. E-mail transmission cannot be guaranteed to be secure or 
error-free as information could be intercepted, corrupted, lost, destroyed, 
arrive late or incomplete, or contain viruses. The sender therefore does 
not accept liability for any errors or omissions in the contents of this 
message, which arise as a result of e-mail transmission. ****_


Current thread: