Re: The Making of a Router

[Ray Soucy <rps () maine edu>]

It seems to be a pretty "hot button" issue, but I feel that modern hardware
is more than capable of pushing packets.  The old wisdom of "only hardware
can do it efficiently" is starting to prove untrue.  10G might still be a
challenge (I haven't tested), but 1G is not even close to being an issue.
 Depending on the target for your deployment, it might make sense to
whitebox a router or firewall instead of spending 20K on it.  Especially if
you're working with any kind of scale.

TL;DR I think the backlash against anything but big iron routing is
becoming an old way of thinking.



On Fri, Dec 27, 2013 at 6:56 PM, Jon Sands <fohdeesha () gmail com> wrote:

> On 12/27/2013 4:23 PM, Matt Palmer wrote:
>
> > There *is* a world outside of Silly Valley, you know... a world where
> > money doesn't flow like a mighty cascade from the benevolent wallets of
> > vulture capitalists, into the waiting arms of every crackpot with an
> > elevator pitch. - Matt
>
> Yes, and in that world, one should probably not start up a FTTH ISP when
> one has not even budgeted for a router, among a thousand other things. And
> if you must, you should probably figure out your cost breakdown beforehand,
> not after. Baldur, you mention $200k total to move 10gb with Juniper (which
> seems insanely off to me). Look into Brocades CER line, you can move 4x
> 10gbe per chassis for under 12k.
>
> --
> Jon Sands



-- 
Ray Patrick Soucy
Network Engineer
University of Maine System

T: 207-561-3526
F: 207-561-3531

MaineREN, Maine's Research and Education Network
www.maineren.net