Re: 10G switchrecommendaton

[Fabien Delmotte <fdelmotte1 () mac com>]

I worked for Extreme, and I deployed a lot of X650 (24 10G ports) for DataCenter environment. The box is really good.
In fact if you use the box at a layer 2 it is perfect, BUT DON'T use their BGP code, they never understood what is BGP 
:)

Regards

Fabien

Le 27 janv. 2012 à 09:54, Grant Ridder a écrit :

> I have experience with the Extreme's Alpine, Blackdiamond, x250, and x450
> and i discovered that the command line is fairly different than Cisco, HP,
> or Dell.  However, since they are a relatively small company with a small
> but strong customer base, their support is fairly good.  I can't speak for
> 10G/40G implementations, but from my experiences, they support has a quick
> response time and they do quite a bit of lab replication to figure out the
> exact root cause.
>
> -Grant
>
> On Fri, Jan 27, 2012 at 2:32 AM, Erik Bais <ebais () a2b-internet com> wrote:
>
> > We have a full purple network, so my answer for this would be Extreme
> > Networks.
> >
> > Check out the Lipis report on the X670 / x670v 48 port 10G 1U switches.
> >
> > vs other vendor equipment :
> >
> > http://www.extremenetworks.com/libraries/products/ExtremeX670V_Lippis%20Report_Fall.pdf
> >
> >
> > Regards,
> > Erik Bais
> >
> > Verstuurd vanaf mijn iPad
> >
> > Op Jan 26, 2012 om 21:20 heeft Deric Kwok <deric.kwok2000 () gmail com> het
> > volgende geschreven:
> >
> > > Hi all
> > >
> > > I would like to have 10G switchrecommendaton
> > > Ipref software can test around 9.2G but we can have congestion over 6G
> > > in single port!
> > >
> > > Thank you