Re: BGPttH. Neustar can do it, why can't we?

[Owen DeLong <owen () delong com>]

That's simply not true at all...

Let's look at what it takes to configure BGP as I suggested...

1. The ASN number of the two providers
2. The ASN to be used for the local side
3. The IP Address to use on the local end of each connection
4. The IP Address to peer with on each connection
5. The prefix(es) to be advertised.

Of these 5, only items 2 and 5 have to come from the customer and the customer needs to provide both of these to both 
ISPs anyway for them to configure their side.

It would be trivial for providers and CPE vendors to develop a standardized API by which a router could retrieve all 5 
pieces of information for a given connection once that connection is plugged in to the router. It could literally be as 
simple as:

        1.      Port gets address via SLAAC or DHCP
        2.      Port retrieves XML configuration document from http://bgpconfig.local (or user-specified URL provided 
by ISP, or whatever)
                        <XML>
                                <PROVIDERASN>6939</PROVIDERASN>
                                <LOCALASN>65512</LOCALASN>
                                <PROVIDERIPv4>192.0.2.21/30</PROVIDERIPv4>
                                <PROVIDERIPv6>2001:db8:1fea:93a9::1/64</PROVIDERIPv6>
                                <LOCALIPv4>192.0.2.22/30</LOCALIPv4>
                                <LOCALIPv6>2001:db8:1fea:93a9::2/64</LOCALIPv6>
                                <PrefixInformation>
                                        <PrefixAccepted>203.0.113.0/24</PrefixAccepted>
                                        <PrefixAccepted>198.51.100.0/24</PrefixAccepted>
                                        <PrefixAnnounced>0.0.0.0/0</PrefixAnnounced>
                                </PrefixInformation>
                        </XML>

(Yes, I realize that is a bit of an oversimplification of the XML syntax, but you get the idea)

        3.      Router configures port and BGP session according to received XML document, including
                appropriate prefix filters.

        4.      Router runs with that XML based configuration as long as link-state and power remain.

That would allow a zeroconf BGP-enabled router in relatively small hardware accepting a default route that would work 
at least as well as today's dual-NAT based boxes. Note that BGP is not redesigned or even altered to achieve this. 
Since Linksys/DLink/Netgear/$EVERYONE already has web servers and clients embedded in their gear, the XML parser (or 
JSON or whatever they choose to use for standard encoding) would be pretty straight forward.

Yes, the operator/provider has to do some additional configuration, but speaking as a network operator, I know that 
this can be automated because the management of BGP configurations, including the filters _IS_ that automated where I 
work. If the provider is telling the router which prefixes to permit announcement of through the configuration URL, 
then it's even more reliable, right?

Owen

On Aug 6, 2012, at 15:05 , Scott Helms <khelms () ispalliance net> wrote:

> Owen,
>
>    That's like saying if it were easy to fly we'd all be pilots, which isn't true either.  BGP would need to be 
> completely redesigned/replaced before it could possibly be automated to that level much less implemented by the 
> Lynksis/DLink/Netgear/$yourfavoritesohorouter vendor.  Business would need a reason to implement BGP and most simply 
> don't AND BGP would have to be dramatically simpler and safer.  Operators already have to be deeply involved (AKA 
> filtering the announced networks) with edge network BGP implementations to prevent someone from announcing they're 
> the preferred route for some other organization's netblock.  This happens already on occasion and all of the people 
> who run routers speaking BGP are generally professionals.
>
> On 8/6/2012 4:27 PM, Owen DeLong wrote:
> > Respectfully, I disagree... I think this is a causal chain...
> >
> > 1.   Lack of cost-effective BGP-based service means that
> > 2.   CPE vendors are not motivated to provide self-configuring bgp-speaking routers to behave in this manner means 
> > that
> > 3.   SMBs seek other solutions using available CPE technology.
> >
> > If cost-effective BGP-based service were available, providers would likely work with CPE vendors to get automation 
> > features added to products to support such services and multihomed organizations would definitely want to use those 
> > features.
> >
> > Owen
> >
> > On Aug 6, 2012, at 13:16 , Scott Helms <khelms () ispalliance net> wrote:
> >
> > > Probability is much too strong IMO.  Most businesses don't even consider multi-homing and many that do use NAT 
> > > devices with several connections rather than trying to run BGP.
> > >
> > > #not associated nor do I recommend, just an example
> > >
> > > http://www.fatpipeinc.com/warp/index.html
> > >
> > >
> > > > This ignores the probability that cost effective BGP service availability would
> > > > strongly drive demand for AS Numbers and adoption of the technology.
> > > >
> > > > Owen
> > >
> > > -- 
> > > Scott Helms
> > > Vice President of Technology
> > > ZCorum
> > > (678) 507-5000
> > > --------------------------------
> > > http://twitter.com/kscotthelms
> > > --------------------------------
>
>
> -- 
> Scott Helms
> Vice President of Technology
> ZCorum
> (678) 507-5000
> --------------------------------
> http://twitter.com/kscotthelms
> --------------------------------