nanog mailing list archives
Re: Cisco HFR
From: Peter Lothberg <roll () Stupi SE>
Date: Tue, 25 May 2004 20:51:41 PDT
Interestingly the OC-768 card has a max transmit power of 5dB and is short-range optics only.
The 300-pin-MSA for OC768 has a SR spec of TX 0..+3dBm, RX min -5dBm. Dispersion is max 40ps/nm.
As far as I know there are no 2R or 3R regeneration solutions for long haul 40Gb/s circuits, nor are there any DWDM systems that can do 8, 16 or 32 40Gb/s wavelengths.
Incorrect. There are transponders that put a 40G signal in a 10G DWDM optical system. (You have to move a step up from morse code to make the side-bands fit..) And they atleast run in 80 chanel systems. -P
Current thread:
- Re: Cisco HFR, (continued)
- Re: Cisco HFR Tony Li (May 27)
- RE: Cisco HFR Burton, Chris (May 25)
- Re: Cisco HFR Eric Kuhnke (May 25)
- Re: Cisco HFR Mikael Abrahamsson (May 25)
- Re: Cisco HFR Eric Kuhnke (May 25)
- RE: Cisco HFR Michel Py (May 25)
- RE: Cisco HFR Andy Dills (May 25)
- RE: Cisco HFR Neil J. McRae (May 27)
- Re: Cisco HFR Simon Lockhart (May 27)
- RE: Cisco HFR Andy Dills (May 25)
- Re: Cisco HFR Kevin Oberman (May 25)
- RE: Cisco HFR Burton, Chris (May 25)
- Re: Cisco HFR Peter Lothberg (May 25)
- Re: Cisco HFR Mikael Abrahamsson (May 25)
- Re: Cisco HFR Peter Lothberg (May 25)
- Re: Cisco HFR Mikael Abrahamsson (May 25)
- Re: Cisco HFR Henry Linneweh (May 27)
- Re: Cisco HFR Mikael Abrahamsson (May 25)
- Re: Cisco HFR Hannigan, Martin (May 25)
- RE: Cisco HFR Tomas Daniska (May 26)
- RE: Cisco HFR Williams, Jeff (May 26)
- RE: Cisco HFR Herman Harless (May 26)
- Re: Cisco HFR Petri Helenius (May 26)
- RE: Cisco HFR Ryan Dobrynski (May 27)