nanog mailing list archives
RE: zebra/ospf issue
From: "Mark Radabaugh" <mark () amplex net>
Date: Fri, 8 Feb 2002 21:38:01 -0500
-----Original Message----- From: owner-nanog () merit edu [mailto:owner-nanog () merit edu]On Behalf Of Josh Gentry Sent: Friday, February 08, 2002 1:38 AM To: nanog () merit edu Subject: zebra/ospf issue Folks, I'm experimenting with using Zebra running on a Debian box to do OSPF with the Ciscos on our network. The zebra box has 2 interfaces, each in a different area. This is the first time we have tried to impliment multiple areas on our network. Right now, area 51 consists only of the zebra box and a Cisco 2500, and is just for testing. The zebra box is forming a full adjacency with the Cisco in area 51 with no problems. It will not, however, become fully adjacent with the DR and BDR in area 0. This seems to be preventing the distrobution
I think this is normal behavior (without really analyzing things...). See if this helps any: http://www.cisco.com/warp/customer/104/11.html Mark Radabaugh
Current thread:
- zebra/ospf issue Josh Gentry (Feb 07)
- Re: zebra/ospf issue Paul Froutan (Feb 08)
- RE: zebra/ospf issue Mark Radabaugh (Feb 08)
- Re: zebra/ospf issue Josh Gentry (Feb 08)
- Re: zebra/ospf issue Josh Gentry (Feb 14)
- Re: zebra/ospf issue Josh Gentry (Feb 17)
- <Possible follow-ups>
- zebra/ospf issue Josh Gentry (Feb 11)
- Re: zebra/ospf issue Josh Gentry (Feb 11)
- Re: zebra/ospf issue Paul Froutan (Feb 11)
- RE: zebra/ospf issue Mark Radabaugh (Feb 11)
- Re: zebra/ospf issue Josh Gentry (Feb 16)
- Re: zebra/ospf issue Josh Gentry (Feb 16)