Security Basics mailing list archives
Re: Change MTU settings on Solaris 5.9
From: Robert Escue <roescue () cox net>
Date: Wed, 12 Oct 2005 20:06:44 -0400
hpalmer () comsquared com wrote:
Recently a customer of ours has been having an issue w/ remote login from mulitiple customers on there network. Our company installed, configured and setup A Sun Fire V250. The issue, there NetAdmin states, "Our customers are not able to login to your /our Sun Box because the MTU is at the default setting of 1500 and needs to be 1480 or 1460." This I (System Database Admin) believe is totally wrong. But to prove a point I would like to check the current settings and make changes if needed. I read some where before that the changes could be made in /etc/networks/interfaces, but not able to locate that directory...any suggestions? Do or do not, there is no try. -Yoda.
Maybe this will help: http://www.cisco.com/warp/public/105/38.shtml#solaris8And I think you are right, normally you would only make those changes if you were going through a VPN.
Robert Escue System Administrator
Current thread:
- Change MTU settings on Solaris 5.9 hpalmer (Oct 12)
- Re: Change MTU settings on Solaris 5.9 Cory Stoker (Oct 13)
- Re: Change MTU settings on Solaris 5.9 Fernando Gont (Oct 17)
- Re: Change MTU settings on Solaris 5.9 Robert Escue (Oct 13)
- Re: Change MTU settings on Solaris 5.9 Fernando Gont (Oct 17)
- <Possible follow-ups>
- RE: Change MTU settings on Solaris 5.9 Ryan, Neil (Mission Systems) (Oct 14)
- Re: Change MTU settings on Solaris 5.9 Cory Stoker (Oct 13)