Re: Wireshark parameter

[Oriplatform Dp <oriplatform85 () yahoo com>]

Thanks for your reply,
Actually, I want these parameters and I ask to this mailing list because I'm not get them.I have about 4 files 
(.pcapng) each scenario.
I'm confused about TCP, UDP, or both are unrelated.
In the scenario 1, the list of protocols in the wireshark are ARPICMPOLSR V1TCP (the most)UDP
in the scenario 2, they areARPICMPOLSR V1RTP (the most)UDP
regards

  

     On Tuesday, November 18, 2014 4:43 PM, NITIN GOYAL <nitinkumgoyal () gmail com> wrote:
   

 
On Mon, Nov 17, 2014 at 10:17 PM, Oriplatform Dp <oriplatform85 () yahoo com> wrote:


I'm looking for the value of this parameter in wireshark:end-to-end delay, throughput, packet loss, and jitter.
I've done a couple of scenarios.1. I send a file from one node (192.168.100.1) to another node (192.168.100.6) using 
file transfer software in the LAN.
2. I'm broadcasting (192.168.100.1) video via VLC using RTSP protocol and the one of the other node (192.168.100.6) 
streams that video.



Your question is not clear. You want these parameters or you are not getting them? If the media or dat is sent over RTP 
with RTSP, there is one RTP analyser which will give all of these params.


___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe