Re: Wireshark development setup Help

[wsgd <wsgd () free fr>]

My building env commands on Windows 7 64 bits, depending on the target :
- "C:\Program Files (x86)\Microsoft Visual Studio 
9.0\VC\vcvarsall.bat"              if 2008 & win32
- "C:\Program Files (x86)\Microsoft Visual Studio 
9.0\VC\bin\vcvars64.bat"           if 2008 & win64
- "C:\Program Files (x86)\Microsoft Visual Studio 
10.0\VC\vcvarsall.bat"             if 2010 & win32
- call "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" 
/x64            if 2010 & win64

Could exist other possibilities.


Olivier


Le 09/11/2013 08:16, Sreejith M M a écrit :
> Thank you John.
>
> Unfortunately, I am not in a position to re install my windows image 
> if something goes wrong.
> So I would wait for some one else to explain why this mysterious "if 
> you want to build 64-bit binaries for Windows 7" is present in the 
> tutorial, I hope that it would be for some good reason and I can work 
> around this problem in a simpler way.
>
> Otherwise,I will have to take your advise and do all the steps in some 
> other windows installation.
>
> Sreejith
>
>
> On Sat, Nov 9, 2013 at 2:19 AM, John Dill <John.Dill () greenfieldeng com 
> <mailto:John.Dill () greenfieldeng com>> wrote:
>
>
>     >Message: 6
>     >Date: Fri, 8 Nov 2013 23:14:28 +0530
>     >From: Sreejith M M <sreejith.mm () gmail com
>     <mailto:sreejith.mm () gmail com>>
>     >To: wireshark-dev () wireshark org <mailto:wireshark-dev () wireshark org>
>     >Subject: [Wireshark-dev] Wireshark development setup Help
>     >Message-ID:
>     >      
>      <CAEDT3uTxa4GqX9x5HnBfmvHRVM42-m_C_67-Kf6jZcMUjmEeNg () mail gmail com
>     <mailto:CAEDT3uTxa4GqX9x5HnBfmvHRVM42-m_C_67-Kf6jZcMUjmEeNg () mail gmail com>>
>     >Content-Type: text/plain; charset="iso-8859-1"
>     >
>     >I am trying to make a new dissector for wireshark. As part of
>     this, I am
>     >following wireshark doc to setup tools and source code .
>     >
>     >I have a 32 bit windows 7
>     >I followed below steps as shown in the
>     >http://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html
>     page
>     >
>     >
>     >
>     >   1.
>     >
>     >   C compiler:
>     Download<http://www.microsoft.com/visualstudio/eng/downloads#d-2010-express>and
>     >install "Microsoft Visual C++ 2010 Express Edition." (This is a very
>     >   large download.)
>     >   2.
>     >
>     >   C compiler service pack:
>     >Download<http://www.microsoft.com/en-us/download/details.aspx?id=23691>and
>     >install "Microsoft Visual Studio 2010 Service Pack 1." (This is a
>     very
>     >   large download.)
>     >   3. Install Cygwin
>     >   4. Install python
>     >   5. Install TortoiseSVN
>     >   6. edit config.nmake
>     >
>     >After this I am not able to find
>     >
>     >*C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.Cmd*
>     >
>     >*or*
>     >
>     >
>     >vcvarsall.bat or vcvars32.bat
>     >
>     >
>     >One thing is that , I am not having v7.1 ,rather v7.0A. But I am
>     suprised
>     >that this folder doesnt have any of the above 3 files.
>     >
>     >
>     >Please help to proceed
>
>     I ran into the same problem, where I realized that I needed the
>     Windows SDK to do the actual build in Windows 7 32-bit.
>
>     The problem was that my development install was broken where I
>     could not properly install the Windows SDK (step 2) if I already
>     installed the C compiler service pack (step 4).  I would uninstall
>     whatever you have done in section 2.2.1, and reinstall *all* those
>     components in order from steps 1 through 4.  Unfortunately, I had
>     to re-image my Windows installation before I could get the
>     Wireshark build process to work because the uninstall broke the
>     registry to the point that I couldn't get Windows SDK to
>     re-install properly.  Starting over, I could get the Wireshark
>     installation to work if I ran each step without skipping steps 2
>     or 4, this time installing the Windows SDK even though I was on a
>     32-bit Windows 7 computer.
>
>     I would consider removing the "if you want to build 64-bit
>     binaries for Windows 7" text simply because it can give people the
>     impression that you don't need to install it if you have Windows 7
>     32-bit.  If someone has successfully built Wireshark for Windows 7
>     32-bit skipping steps 2 and 4 of section 2.2.1, then I must have a
>     misunderstanding somewhere.
>
>     Hope it helps!
>     John D.
>
>     ___________________________________________________________________________
>     Sent via:    Wireshark-dev mailing list
>     <wireshark-dev () wireshark org <mailto:wireshark-dev () wireshark org>>
>     Archives: http://www.wireshark.org/lists/wireshark-dev
>     Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>                  mailto:wireshark-dev-request () wireshark org
>     <mailto:wireshark-dev-request () wireshark org>?subject=unsubscribe
>
>
>
>
>
>
> ___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev () wireshark org>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>               mailto:wireshark-dev-request () wireshark org?subject=unsubscribe


--
Wireshark Generic Dissector http://wsgd.free.fr

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request () wireshark org?subject=unsubscribe