Re: about the VOIP bandwidth

[nangergong <nangergong () gmail com>]

 Thank you.
I think this makes sense.
It is strange that the traffic monitoring program shows that the bandwidth
used is about 64kbps for the VOIP program...



On Sun, Jan 30, 2011 at 10:44 PM, Jaap Keuter <jaap.keuter () xs4all nl> wrote:

> On Sun, 30 Jan 2011 22:21:56 +0100, Anders Broman wrote:
>
> nangergong skrev 2011-01-30 20:12:
>
> Hi, all:
>
>   I'm using wireshark to capture VOIP streams, the Codec used in the VOIP
> session is G711, which uses bandwidth of 64kbps.
>
>   When I follow the following steps to analyse the VOIP streams:
>
>   Telephony->RTP->show all streams->Analyze,
>
>   I found that the IP BW (bandwidth) column shows that the bandwidth is
> about 81.6 kbps.   I also used a traffic monitoring program to monitor the
> traffic, which shows the bandwidth used is about 64kbps (conformant to G711
> bit rate ). So, I wonder whether wireshark is accurate in measuring the
> bandwidth? or even other metrics such as jitter,etc..
>
>   Thank you!
>
> The codec data inside the RTP is 64Kbit/s with RTP/UDP/IP/Ethernet headers
> the rate should be something like 96Kb/s, if memory serves.
> /Anders
>
> It all depends on the protocol layer you look at. This site<http://www.bandcalc.com/>lets you have a good insight in 
> what's involved here.
>
> Thanks,
> Jaap
>
> ___________________________________________________________________________
> Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
> Archives:    http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>             mailto:wireshark-users-request () wireshark org
> ?subject=unsubscribe
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe