Wireshark mailing list archives
Re: about the VOIP bandwidth
From: Anders Broman <a.broman () bredband net>
Date: Sun, 30 Jan 2011 22:21:56 +0100
nangergong skrev 2011-01-30 20:12:
The codec data inside the RTP is 64Kbit/s with RTP/UDP/IP/Ethernet headers the rate should be something like 96Kb/s, if memory serves.Hi, all:I'm using wireshark to capture VOIP streams, the Codec used in the VOIP session is G711, which uses bandwidth of 64kbps.When I follow the following steps to analyse the VOIP streams: Telephony->RTP->show all streams->Analyze,I found that the IP BW (bandwidth) column shows that the bandwidth is about 81.6 kbps. I also used a traffic monitoring program to monitor the traffic, which shows the bandwidth used is about 64kbps (conformant to G711 bit rate ). So, I wonder whether wireshark is accurate in measuring the bandwidth? or even other metrics such as jitter,etc..Thank you!
/Anders
___________________________________________________________________________ Sent via: Wireshark-users mailing list<wireshark-users () wireshark org> Archives: http://www.wireshark.org/lists/wireshark-users Unsubscribe: https://wireshark.org/mailman/options/wireshark-users mailto:wireshark-users-request () wireshark org?subject=unsubscribe
___________________________________________________________________________ Sent via: Wireshark-users mailing list <wireshark-users () wireshark org> Archives: http://www.wireshark.org/lists/wireshark-users Unsubscribe: https://wireshark.org/mailman/options/wireshark-users mailto:wireshark-users-request () wireshark org?subject=unsubscribe
Current thread:
- about the VOIP bandwidth nangergong (Jan 30)
- Re: about the VOIP bandwidth Anders Broman (Jan 30)
- Re: about the VOIP bandwidth Jaap Keuter (Jan 30)
- Re: about the VOIP bandwidth nangergong (Jan 31)
- Re: about the VOIP bandwidth Martin Visser (Jan 31)
- Re: about the VOIP bandwidth Jaap Keuter (Jan 30)
- Re: about the VOIP bandwidth Anders Broman (Jan 30)