Snort mailing list archives

Re: snort_dynamicpreprocessor


From: Sam Johnson <Sam.Johnson () flagshipcredit com>
Date: Tue, 18 Sep 2018 17:25:32 +0000

James was able to help me figure out the issue.
Had to symlink daq-modules-config to /bin since I was running under root. Cleared the issue right up and was able to 
make Snort.

Sam Johnson


-----Original Message-----
From: James Lay <jlay () slave-tothe-box net>
Sent: Tuesday, September 18, 2018 1:22 PM
To: Sam Johnson <Sam.Johnson () flagshipcredit com>
Subject: Re: [Snort-users] snort_dynamicpreprocessor

Excellent...might wanna shoot that info out to the list so other folks with the same question will get the answer :)  
And FWIW the reason is that /usr/local/bin isn't in root's path...kinda dumb but there it is.

James

On 2018-09-18 11:20, Sam Johnson wrote:
I am under root. Also, I checked my other box and it also had the
daq-modules-config under /bin. So I symlinked it to there from
/usr/local/bin and was able to successfully run ./configure! Thanks
for the help!

Sam Johnson

-----Original Message-----
From: James Lay <jlay () slave-tothe-box net>
Sent: Tuesday, September 18, 2018 1:19 PM
To: Sam Johnson <Sam.Johnson () flagshipcredit com>
Subject: Re: [Snort-users] snort_dynamicpreprocessor

Try and run it......and are you ./configuring as sudo or root by
chance?

On 2018-09-18 11:15, Sam Johnson wrote:
Daq-config-modules is located at /usr/local/bin

Sam Johnson


-----Original Message-----
From: James Lay <jlay () slave-tothe-box net>
Sent: Tuesday, September 18, 2018 1:15 PM
To: Sam Johnson <Sam.Johnson () flagshipcredit com>
Subject: Re: [Snort-users] snort_dynamicpreprocessor

Where is the file currently at?



On 2018-09-18 11:13, Sam Johnson wrote:
Hi James,

Where would I symlink that daq-modules-config to?

Thanks,

Sam Johnson


-----Original Message-----
From: Snort-users <snort-users-bounces () lists snort org> On Behalf Of
James Lay via Snort-users
Sent: Tuesday, September 18, 2018 12:11 PM
To: snort-users () lists snort org
Subject: Re: [Snort-users] snort_dynamicpreprocessor

Symlink the command:

/usr/local/bin/daq-modules-config

James

On 2018-09-18 09:56, Sam Johnson wrote:
Okay so weirdly enough… I just went installed on a second machine
(have about 4 or so to do altogether), and I’m now getting the same
exact error:

./configure: line 16264: daq-modules-config: command not found

checking for daq_load_modules in -ldaq_static... no

   ERROR!  daq_static library not found, go get it from

   http://www.snort.org/ [1].

I added in the –with-daq-libraries and –with-daq-includes but it
still doesn’t want to find daq. I made daq, installed the RPM
package of snort… nothing seems to work. I see all the daq
libraries in /usr/local/lib and /usr/local/include. I don’t get why
this wouldn’t work. Any thoughts?

FROM: Carter Waxman (cwaxman) <cwaxman () cisco com>
SENT: Wednesday, September 12, 2018 9:37 AM
TO: Sam Johnson <Sam.Johnson () flagshipcredit com>;
snort-users () lists snort org
SUBJECT: Re: [Snort-users] snort_dynamicpreprocessor

 * For static DAQ, use ./configure
--with-daq-libraries=/usr/local/lib
–with-daq-includes=/usr/local/include and adjust those paths
accordingly, then run make clean and make. ldconfig is for dynamic
libraries.

 * List the contents of the package / rpm and ensure that the paths
in snort.conf match the dynamic paths. The config should be
rewritten automatically if it’s our package or the packager used
our spec file.

Thanks,

Carter

FROM: Snort-users <snort-users-bounces () lists snort org> on behalf
of Sam Johnson <Sam.Johnson () flagshipcredit com>
DATE: Tuesday, September 11, 2018 at 5:01 PM
TO: "snort-users () lists snort org" <snort-users () lists snort org>
SUBJECT: [Snort-users] snort_dynamicpreprocessor

Hello all,

I was able to manually compile snort just fine on my test system.
Went to do it on prod and got the error about not being able to
find the daq static libraries (daq was compiled and installed
successfully and I added /usr/local/lib to ldconfig). So I decided
to use the ‘yum install’ method. Which worked without any issue.
When I went to test run snort I got the error that it was not able
to find the snort_dynamicpreprocessor. Took a look and it is
located at /usr/local/lib/ on my test machine, but I do not have it
at all on my prod machine (which again was installed using yum install).

At first I started going through and commenting out the lines that
were erroring out for the dynamicpreprocessor, but I’d rather just
get that installed and have it if needed. Can anyone tell me how to
actually get it installed? Should I just recompile manually? Or
will that mess up the current snort install?

Thanks for your time!

Sam Johnson

The information transmitted via this email is intended only for the
person or entity to which it is addressed and may contain
confidential and/or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any
action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you receive
this in error, please contact the sender and delete the material from any computer.

The information transmitted via this email is intended only for the
person or entity to which it is addressed and may contain
confidential and/or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any
action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you receive
this in error, please contact the sender and delete the material
from any computer. The information transmitted via this email is
intended only for the person or entity to which it is addressed and
may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon this information by persons
or entities other than the intended recipient is prohibited. If you
receive this in error, please contact the sender and delete the
material from any computer.

Links:
------
[1] http://www.snort.org/
_______________________________________________
Snort-users mailing list
Snort-users () lists snort org
Go to this URL to change user options or unsubscribe:
https://lists.snort.org/mailman/listinfo/snort-users

To unsubscribe, send an email to:
snort-users-leave () lists snort org

Please visit http://blog.snort.org to stay current on all the
latest Snort news!

Please follow these rules:
https://snort.org/faq/what-is-the-mailing-list-etiquette
_______________________________________________
Snort-users mailing list
Snort-users () lists snort org
Go to this URL to change user options or unsubscribe:
https://lists.snort.org/mailman/listinfo/snort-users

To unsubscribe, send an email to:
snort-users-leave () lists snort org

Please visit http://blog.snort.org to stay current on all the latest
Snort news!

Please follow these rules:
https://snort.org/faq/what-is-the-mailing-list-etiquette
The information transmitted via this email is intended only for the
person or entity to which it is addressed and may contain
confidential and/or privileged material. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance
upon this information by persons or entities other than the intended
recipient is prohibited. If you receive this in error, please
contact the sender and delete the material from any computer.
The information transmitted via this email is intended only for the
person or entity to which it is addressed and may contain
confidential and/or privileged material. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance
upon this information by persons or entities other than the intended
recipient is prohibited. If you receive this in error, please contact
the sender and delete the material from any computer.
The information transmitted via this email is intended only for the
person or entity to which it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination
or other use of, or taking of any action in reliance upon this
information by persons or entities other than the intended recipient
is prohibited. If you receive this in error, please contact the sender
and delete the material from any computer.
The information transmitted via this email is intended only for the person or entity to which it is addressed and may 
contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking 
of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. 
If you receive this in error, please contact the sender and delete the material from any computer.
_______________________________________________
Snort-users mailing list
Snort-users () lists snort org
Go to this URL to change user options or unsubscribe:
https://lists.snort.org/mailman/listinfo/snort-users

        To unsubscribe, send an email to:
        snort-users-leave () lists snort org

Please visit http://blog.snort.org to stay current on all the latest Snort news!

Please follow these rules: https://snort.org/faq/what-is-the-mailing-list-etiquette

Current thread: