Re: snort_dynamicpreprocessor

[James Lay via Snort-users <snort-users () lists snort org>]

Symlink the command:

/usr/local/bin/daq-modules-config

James

On 2018-09-18 09:56, Sam Johnson wrote:
> Okay so weirdly enough… I just went installed on a second machine
> (have about 4 or so to do altogether), and I’m now getting the same
> exact error:
>
> ./configure: line 16264: daq-modules-config: command not found
>
> checking for daq_load_modules in -ldaq_static... no
>
>    ERROR!  daq_static library not found, go get it from
>
>    http://www.snort.org/ [1].
>
> I added in the –with-daq-libraries and –with-daq-includes but it
> still doesn’t want to find daq. I made daq, installed the RPM
> package of snort… nothing seems to work. I see all the daq libraries
> in /usr/local/lib and /usr/local/include. I don’t get why this
> wouldn’t work. Any thoughts?
>
> FROM: Carter Waxman (cwaxman) <cwaxman () cisco com>
> SENT: Wednesday, September 12, 2018 9:37 AM
> TO: Sam Johnson <Sam.Johnson () flagshipcredit com>;
> snort-users () lists snort org
> SUBJECT: Re: [Snort-users] snort_dynamicpreprocessor
>
>         * For static DAQ, use ./configure
> --with-daq-libraries=/usr/local/lib
> –with-daq-includes=/usr/local/include and adjust those paths
> accordingly, then run make clean and make. ldconfig is for dynamic
> libraries.
>
>         * List the contents of the package / rpm and ensure that the paths
> in snort.conf match the dynamic paths. The config should be rewritten
> automatically if it’s our package or the packager used our spec
> file.
>
> Thanks,
>
> Carter
>
> FROM: Snort-users <snort-users-bounces () lists snort org> on behalf of
> Sam Johnson <Sam.Johnson () flagshipcredit com>
> DATE: Tuesday, September 11, 2018 at 5:01 PM
> TO: "snort-users () lists snort org" <snort-users () lists snort org>
> SUBJECT: [Snort-users] snort_dynamicpreprocessor
>
> Hello all,
>
> I was able to manually compile snort just fine on my test system. Went
> to do it on prod and got the error about not being able to find the
> daq static libraries (daq was compiled and installed successfully and
> I added /usr/local/lib to ldconfig). So I decided to use the ‘yum
> install’ method. Which worked without any issue. When I went to test
> run snort I got the error that it was not able to find the
> snort_dynamicpreprocessor. Took a look and it is located at
> /usr/local/lib/ on my test machine, but I do not have it at all on my
> prod machine (which again was installed using yum install).
>
> At first I started going through and commenting out the lines that
> were erroring out for the dynamicpreprocessor, but I’d rather just
> get that installed and have it if needed. Can anyone tell me how to
> actually get it installed? Should I just recompile manually? Or will
> that mess up the current snort install?
>
> Thanks for your time!
>
> Sam Johnson
>
> The information transmitted via this email is intended only for the
> person or entity to which it is addressed and may contain confidential
> and/or privileged material. Any review, retransmission, dissemination
> or other use of, or taking of any action in reliance upon this
> information by persons or entities other than the intended recipient
> is prohibited. If you receive this in error, please contact the sender
> and delete the material from any computer.
>
> The information transmitted via this email is intended only for the
> person or entity to which it is addressed and may contain confidential
> and/or privileged material. Any review, retransmission, dissemination
> or other use of, or taking of any action in reliance upon this
> information by persons or entities other than the intended recipient
> is prohibited. If you receive this in error, please contact the sender
> and delete the material from any computer. The information transmitted
> via this email is intended only for the person or entity to which it
> is addressed and may contain confidential and/or privileged material.
> Any review, retransmission, dissemination or other use of, or taking
> of any action in reliance upon this information by persons or entities
> other than the intended recipient is prohibited. If you receive this
> in error, please contact the sender and delete the material from any
> computer.
>
> Links:
> ------
> [1] http://www.snort.org/
> _______________________________________________
> Snort-users mailing list
> Snort-users () lists snort org
> Go to this URL to change user options or unsubscribe:
> https://lists.snort.org/mailman/listinfo/snort-users
>
>         To unsubscribe, send an email to:
>         snort-users-leave () lists snort org
>
> Please visit http://blog.snort.org to stay current on all the latest 
> Snort news!
>
> Please follow these rules:
> https://snort.org/faq/what-is-the-mailing-list-etiquette
_______________________________________________
Snort-users mailing list
Snort-users () lists snort org
Go to this URL to change user options or unsubscribe:
https://lists.snort.org/mailman/listinfo/snort-users

        To unsubscribe, send an email to:
        snort-users-leave () lists snort org

Please visit http://blog.snort.org to stay current on all the latest Snort news!

Please follow these rules: https://snort.org/faq/what-is-the-mailing-list-etiquette