Re: 'nmap -S <src_addr>' does not use 'iproute2' alternate routing table

[starlight.2012q3 () binnacle cx]

ALSO:

# nmap -e eth4 -S 172.29.86.4 --route-dst 69.160.42.66
69.160.42.66
eth4 eth4 srcaddr 172.29.79.1 nexthop 172.29.79.2
WARNING: If -S is being used to fake your source address, you may also have to use -e <interface> and -Pn .  If you are 
using it to specify your real source address, you can ignore this warning.

Starting Nmap 6.02 ( http://nmap.org ) at 2012-09-10 16:44 EDT
WARNING: No targets were specified, so 0 hosts scanned.
Nmap done: 0 IP addresses (0 hosts up) scanned in 0.05 seconds


AND

# nmap -e eth4 -S 172.29.86.4 -Pn 69.160.42.66

***DEFINATELY*** is sending traffic via 'eth5'
to the MAC of 172.29.79.2.

_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://seclists.org/nmap-dev/