Re: Fail error of nmap on Win Vista

[Santiago Monterrosa <israel.64 () gmail com>]

Thanks ofr your response, it is done since the begining, besides I've found
in the nmap blog that somebody had same problem and was asked to send the
result of nmap --iflist comand, below is mine (also asked for WindDump -d,
but it gets nothing back to me)

C:\Program Files\Nmap>nmap --if
Starting Nmap 4.90RC1 ( http://nmap.org ) at 2009-06-30 18:59 Central
Dayligh
ime (Mexico)
************************INTERFACES************************
DEV   (SHORT) IP/MASK       TYPE        UP   MAC
eth0  (eth0)  (null)/0      ethernet    up   76:13:20:52:41:53
eth1  (eth1)  (null)/0      ethernet    up   76:13:20:52:41:53
eth2  (eth2)  (null)/0      ethernet    up   76:13:20:52:41:53
eth3  (eth3)  (null)/0      ethernet    up   76:13:20:52:41:53
eth4  (eth4)  (null)/0      ethernet    down 00:A0:D1:81:A3:87
eth5  (eth5)  (null)/0      ethernet    up   76:13:20:52:41:53
eth6  (eth6)  (null)/0      ethernet    down 00:18:3F:8E:31:82
eth7  (eth7)  (null)/0      ethernet    down 00:18:3F:8E:31:82
eth8  (eth8)  (null)/0      ethernet    down 00:18:3F:8E:31:82
eth9  (eth9)  (null)/0      ethernet    down 00:50:56:C0:00:01
eth10 (eth10) (null)/0      ethernet    down 00:50:56:C0:00:08
eth11 (eth11) (null)/0      ethernet    down 00:18:3F:8E:31:82
eth12 (eth12) (null)/0      ethernet    up   76:13:20:52:41:53
eth13 (eth13) (null)/0      ethernet    down 00:A0:D1:81:A3:87
ppp0  (ppp0)  (null)/0      other       up
ppp1  (ppp1)  (null)/0      other       down
lo0   (lo0)   127.0.0.1/8   loopback    up
eth14 (eth14) 20.1.31.61/24 ethernet    up   00:16:44:15:20:37
eth15 (eth15) (null)/0      ethernet    up   00:16:44:15:20:37
eth16 (eth16) (null)/0      ethernet    up   00:16:44:15:20:37
eth17 (eth17) (null)/0      ethernet    down 00:18:E7:1B:63:F4
eth0  (eth0)  (null)/0      point2point up
eth1  (eth1)  (null)/0      point2point up
eth2  (eth2)  (null)/0      point2point down
eth3  (eth3)  (null)/0      point2point up
eth4  (eth4)  (null)/0      point2point down
eth5  (eth5)  (null)/0      point2point down
eth6  (eth6)  (null)/0      point2point down
eth7  (eth7)  (null)/0      point2point down
eth8  (eth8)  (null)/0      point2point down
eth9  (eth9)  (null)/0      point2point up
eth10 (eth10) (null)/0      point2point down
eth11 (eth11) (null)/0      point2point down
eth12 (eth12) (null)/0      point2point down
eth13 (eth13) (null)/0      point2point down
DEV   WINDEVICE
eth0  <none>
eth1  <none>
eth2  <none>
eth3  <none>
eth4  <none>
eth5  <none>
eth6  <none>
eth7  <none>
eth8  <none>
eth9  <none>
eth10 <none>
eth11 <none>
eth12 <none>
eth13 <none>
ppp0  <none>
ppp1  <none>
lo0   <none>
eth14 <none>
eth15 <none>
eth16 <none>
eth17 <none>
eth0  <none>
eth1  <none>
eth2  <none>
eth3  <none>
eth4  <none>
eth5  <none>
eth6  <none>
eth7  <none>
eth8  <none>
eth9  <none>
eth10 <none>
eth11 <none>
eth12 <none>
eth13 <none>
**************************ROUTES**************************
DST/MASK           DEV   GATEWAY
127.0.0.1/32       lo0   127.0.0.1
255.255.255.255/32 lo0   127.0.0.1
20.1.31.61/32      eth14 20.1.31.61
20.1.31.255/32     eth14 20.1.31.61
127.255.255.255/32 lo0   127.0.0.1
255.255.255.255/32 eth14 20.1.31.61
20.1.31.0/0        eth14 20.1.31.61
127.0.0.0/0        lo0   127.0.0.1
224.0.0.0/0        eth14 20.1.31.61
224.0.0.0/0        lo0   127.0.0.1
0.0.0.0/0          eth14 20.1.31.1



2009/6/30 David Fifield <david () bamsoftware com>

> On Mon, Jun 29, 2009 at 11:40:36PM -0500, Santiago Monterrosa wrote:
> > Hi there, I've just installed nmap on my machine, which is running
> Windows
> > Vista, I installed nmap along with zenmap, ncat, ndiff, and I've got the
> > following error message
> >
> > Starting Nmap 4.90RC1 ( http://nmap.org ) at 2009-06-29 23:17 Central
> > Daylight Time (Mexico)
> >
> > NSE: Loaded 0 scripts for scanning.
> >
> > Initiating Ping Scan at 23:17
> >
> > dnet: Failed to open device eth4
> >
> > QUITTING!
> > After following command: nmap -O -v 201.149.5.34
> >
> > the command was executed on both command line and Zenmap interface and
> the
> > error message still the same, I even used other different options, looks
> the
> > cause is the interface but is not clear to me how to fix it.
>
> Make sure you are running as an administrator. I think you right-click
> on the icon and select "Run as administrator" or something like that.
>
> David Fifield

_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://SecLists.Org