Re: vista issue

["Gianluca Varenni" <gianluca.varenni () gmail com>]

Do you have UAC enabled?
Did you run nmap in a command prompt opened with elevated privileges?
You open an elevated command prompt by right-clicking on the command prompt 
link and using "run as administrator".

Hope it helps
GV


----- Original Message ----- 
From: "Nelson, Mark - IS" <NelsonM () VitranExpress com>
To: <nmap-dev () insecure org>
Sent: Thursday, July 26, 2007 12:55 PM
Subject: vista issue


> I am running version 4.20 of nmap and version 4.0.1 for winpcap on Vista
> Professional and get
>
>
>
> Starting Nmap 4.20 ( http://insecure.org ) at 2007-07-26 15:54 Eastern
> Daylight
>
> Time
>
> dnet: Failed to open device eth4
>
> QUITTING!
>
>
>
> I have googled this error and tried the suggestions notated....running
> elevated privileges, turning off UAC, going to the beta version of
> winpcap etc...but still get the same error.
>
>
>
> Here is the output of my nmap -iflists...the subnets have been changed
> but not the hosts.
>
>
> Any suggestions besides switching off vista?  (would love to but corp
> reasons won't let me)
>
>
>
> C:\Users\nelsonm>nmap --iflist
>
>
>
> Starting Nmap 4.20 ( http://insecure.org ) at 2007-07-26 15:44 Eastern
> Dayligh
>
> Time
>
> ************************INTERFACES************************
>
> DEV  (SHORT) IP/MASK          TYPE     UP   MAC
>
> eth0 (eth0)  (null)/0         ethernet up   1E:ED:20:52:41:53
>
> eth1 (eth1)  (null)/0         ethernet up   1E:ED:20:52:41:53
>
> eth2 (eth2)  (null)/0         ethernet up   1E:ED:20:52:41:53
>
> eth3 (eth3)  (null)/0         ethernet up   1E:ED:20:52:41:53
>
> eth4 (eth4)  10.10.10.240/24    ethernet up   00:19:B9:46:38:A2
>
> eth5 (eth5)  (null)/0         ethernet up   00:19:B9:46:38:A2
>
> eth6 (eth6)  192.168.119.1/24 ethernet up   00:50:56:C0:00:01
>
> eth7 (eth7)  192.168.163.1/24 ethernet up   00:50:56:C0:00:08
>
> ppp0 (ppp0)  (null)/0         other    up
>
> ppp1 (ppp1)  (null)/0         other    down
>
> lo0  (lo0)   127.0.0.1/8      loopback up
>
> net0 (net0)  (null)/0         other    up
>
> net1 (net1)  (null)/0         other    up
>
> net2 (net2)  (null)/0         other    up
>
> net3 (net3)  (null)/0         other    up
>
> net4 (net4)  (null)/0         other    up
>
> net5 (net5)  (null)/0         other    down
>
>
>
> **************************ROUTES**************************
>
> DST/MASK           DEV  GATEWAY
>
> 255.255.255.255/32 eth4 10.10.10.240
>
> 255.255.255.255/32 eth7 192.168.163.1
>
> 10.10.10.240/32      eth4 10.10.10.240
>
> 10.1.1.255/32      eth4 10.10.10.240
>
> 255.255.255.255/32 eth6 192.168.119.1
>
> 127.0.0.1/32       lo0  127.0.0.1
>
> 127.255.255.255/32 lo0  127.0.0.1
>
> 255.255.255.255/32 lo0  127.0.0.1
>
> 192.168.119.1/32   eth6 192.168.119.1
>
> 192.168.119.255/32 eth6 192.168.119.1
>
> 192.168.163.255/32 eth7 192.168.163.1
>
> 192.168.163.1/32   eth7 192.168.163.1
>
> 10.1.1.0/0         eth4 10.10.10.240
>
> 192.168.119.0/0    eth6 192.168.119.1
>
> 192.168.163.0/0    eth7 192.168.163.1
>
> 127.0.0.0/0        lo0  127.0.0.1
>
> 224.0.0.0/0        eth7 192.168.163.1
>
> 224.0.0.0/0        lo0  127.0.0.1
>
> 224.0.0.0/0        eth4 10.10.10.240
>
> 224.0.0.0/0        eth6 192.168.119.1
>
> 0.0.0.0/0          eth4 10.1.1.4
>
>
>
>
> _______________________________________________
> Sent through the nmap-dev mailing list
> http://cgi.insecure.org/mailman/listinfo/nmap-dev
> Archived at http://SecLists.Org 


_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://SecLists.Org