nanog mailing list archives
Re: Rack rails on network equipment
From: Tore Anderson <tore () fud no>
Date: Mon, 27 Sep 2021 12:07:30 +0200
* Andrey Khomyakov
Interesting tidbit is that we actually used to manufacture custom rails for our Juniper EX4500 switches so the switch can be actually inserted from the back of the rack (you know, where most of your server ports are...) and not be blocked by the zero-U PDUs and all the cabling in the rack. Stock rails didn't work at all for us unless we used wider racks, which then, in turn, reduced floor capacity. As far as I know, Dell is the only switch vendor doing toolless rails so it's a bit of a hardware lock-in from that point of view.
Amen. I suspect that Dell is pretty much alone in realising that rack mount kits that require insertion/removal from the hot aisle is pure idiocy, since the rear of the rack tends to be crowded with cables, PDUs, and so forth. This might be due to Dell starting out as a server manufacturer. *All* rack-mount servers on the market are inserted into (and removed from) the cold aisle of the rack, after all. The reasons that make this the only sensible thing for servers apply even more so for data centre switches. I got so frustrated with this after having to remove a couple of decommissioned switches that I wrote a post about it a few years back: https://www.redpill-linpro.com/techblog/2019/08/06/rack-switch-removal.html Nowadays I employ various strategies to facilitate cold aisle installation/removal, such as: reversing the rails if possible, attaching only a single rack ear (for four-post mounted equipment) or installing rivet nuts directly in the rack ears (for shallow two-post mounted equipment). (Another lesson the data centre switch manufacturers could learn from the server manufacturers is to always include a BMC. I would *much rather* spend my serial console infrastructure budget on switches with built-in BMCs. That way I would get remote power control, IPMI Serial- Over-LAN and so on – all through a *single* Ethernet management cable.) Tore
Current thread:
- Re: Rack rails on network equipment, (continued)
- Re: Rack rails on network equipment Jay Hennigan (Sep 25)
- Re: Rack rails on network equipment Michael Thomas (Sep 25)
- Re: Rack rails on network equipment Shawn L via NANOG (Sep 25)
- Re: Rack rails on network equipment Owen DeLong via NANOG (Sep 25)
- Re: Rack rails on network equipment Brandon Butterworth (Sep 25)
- Re: Rack rails on network equipment Alan Buxey (Sep 26)
- Re: Rack rails on network equipment Doug McIntyre (Sep 27)
- Re: Rack rails on network equipment Mel Beckman (Sep 27)
- Re: Rack rails on network equipment Andrey Khomyakov (Sep 27)
- Re: Rack rails on network equipment Mel Beckman (Sep 27)