Re: MX204 Rails

[Steven Karp <smkarp () galliumnetworks com>]

I tried the Juniper EX-4PST-RMK Kit and the holes do not line up with the MX204.

Sent from my mobile device

> On Jul 17, 2020, at 2:52 PM, Travis Garrison <tgarrison () netviscom com> wrote:
>
> We have used these (purchased from ebay) as universal rails for different products. Seemed a bit better than a shelf.
>
> https://www.apc.com/shop/us/en/products/APC-4-Post-Rackmount-Rails/P-SU032A
>
> Thanks Travis
>
> -----Original Message-----
> From: NANOG <nanog-bounces+tgarrison=netviscom.com () nanog org> On Behalf Of Cory Andrews
> Sent: Thursday, July 16, 2020 2:48 PM
> To: nanog () nanog org
> Subject: Re: MX204 Rails
>
> Have you tried the Juniper EX-4PST-RMK Rail Kit?  It is listed as compatible with Juniper EX and QFX compatible, but 
> appears to be potentially the same as the slide rail kit that comes with the MX series devices.
>
> Cory J Andrews
> NetEquity.com
> 793 Center St. #551
> Lewiston, NY 14092
> 877-582-4726 TF/FAX
>
> > On 7/16/2020 3:37 PM, Simon Lockhart wrote:
> > > On Thu Jul 16, 2020 at 02:27:25PM -0500, Rafael Possamai wrote:
> > > Doesn't the mx204 have rackmount brackets rather than rails?
> > It has ears at the front, and "rails" at the rear.
> >
> > The MX204 would have come with the rear rails when bought new.
> >
> > See 
> > https://www.juniper.net/documentation/en_US/release-independent/junos/
> > topics/topic-map/mx204-installing.html
> >
> > Simon