nanog mailing list archives

Re: NTP question


From: "Harald Koch" <chk () pobox com>
Date: Wed, 01 May 2019 19:03:54 -0400

On Wed, May 1, 2019, at 18:46, Brandon Martin wrote:
Think about what might happen if you lost time sync as a result of the 
incident causing said connectivity outage.  Depending on your time 
sources available, you might see rapid drift or, worst case, lose your 
time reference entirely as a result of equipment restarts, etc.  GPS, as 
long as you have a good view of the sky, provides extremely accurate 
"lights out" time info, both absolute and relative, from a single source 
with no (mostly) strings attached for that purpose.

Properly deployed NTP should calibrate the local hardware clocks to prevent drift even during connectivity outages. 
(I'm talking both the low resolution hardware clocks used for timing across power cycles and reboots, and the 
oscillators used while the OS is running). While most computer hardware is temperature sensitive, if your datacenter is 
suddenly changing temperature enough to cause clock drift, well, you have bigger problems. :)

I admit that this is an anecdote, but in our environment, I find that our GPSDO loses its GPS signal due to weather 
more often than we lose our connections to internet NTP servers.

On the other hand, we once had a site-wide Kerberos authentication outage because all of our Windows clients were using 
some windows NTP client that by default used two NTP sources owned by the software developer; when they both suddenly 
stepped by 20 minutes, Kerberos locked everyone out.

Time is hard :)

-- 
Harald Koch
chk () pobox com


Current thread: