nanog mailing list archives

Re: IPv6 faster/better proof? was Re: Need /24 (arin) asap


From: JORDI PALET MARTINEZ via NANOG <nanog () nanog org>
Date: Fri, 22 Jun 2018 15:05:43 +0200

I’m not really sure “you get what you pay for” … compare with OpenWRT … you have frequent updates, even in days when 
some important security flaw is discovered, as it happened a few months ago with WiFi. You can even develop yourself 
what you want or pay folks to do it for you.

 

And of course, you don’t depend on a specific hardware vendor. You can have a single model or several ones depending on 
customer’s needs, but all share the same firmware. You can buy very good quality products from China with 1-5 
FastEthernet or Gigabit ports, 1 or dual radio WiFi, 1 or several USB (2.0 or 3.0), with or without Bluetooth, SD card 
support, even SATA support, and even LTE support. You have so many vendors that you can even decide what CPU you prefer 
to have and even what Wireless chips …

 

A basic one will be around 15 USD, the most powerful one will be around 30 USD (without the LTE interface, but space 
for it).


Regards,

Jordi

 

 

 

De: Mark Tinka <mark.tinka () seacom mu>
Fecha: viernes, 22 de junio de 2018, 13:23
Para: JORDI PALET MARTINEZ <jordi.palet () consulintel es>
CC: "nanog () nanog org" <nanog () nanog org>
Asunto: Re: IPv6 faster/better proof? was Re: Need /24 (arin) asap

 

 

On 22/Jun/18 12:47, JORDI PALET MARTINEZ wrote:





Yeah I can confirm, as I tested it several times, 6to4 for them is proto41, but it is very confusing and against 
standards nomenclature … This don’t say anything good from a vendor, in my opinion!


Even those networks I know running MikroTik for revenue generation don't run around saying they think they are working 
with the best vendor :-).

But the truth is in the numbers - I'm to find another vendor in my parts that sells more gear without presence in any 
country on the continent.




 

They basically run a Linux … and you have OpenWRT sources with all what they need to implement 4in6 transition 
mechanisms, so no excuses! I must say also that no excuses for other CPE vendors, of course, but others at least have 
DS-Lite or even lw4o6. Very few offer 464XLAT (CLAT part is what the CPE needs) or MAP-T/E. Hopefully this will change 
soon.


On the plus side, MikroTik regularly push out updates for their devices, unlike traditional home CPE whose updates tend 
to disappear one year after you buy and install them, leaving the only option to update software being a hardware 
swap-out.

Can MikroTik do more, certainly. But this is clearly a case of "you get what you pay for". 

On the other hand, Cisco have (yet again) delayed ORR until 2019/2020, if at all. Juniper have screwed up their EX 
switch CLI with this ELS monstrosity, a problem they hope to correct in 2019/2020, if at all. And I'm paying through 
eyes for those puppies...

Mark.




**********************************************
IPv4 is over
Are you ready for the new Internet ?
http://www.consulintel.es
The IPv6 Company

This electronic message contains information which may be privileged or confidential. The information is intended to be 
for the exclusive use of the individual(s) named above and further non-explicilty authorized disclosure, copying, 
distribution or use of the contents of this information, even if partially, including attached files, is strictly 
prohibited and will be considered a criminal offense. If you are not the intended recipient be aware that any 
disclosure, copying, distribution or use of the contents of this information, even if partially, including attached 
files, is strictly prohibited, will be considered a criminal offense, so you must reply to the original sender to 
inform about this communication and delete it.


Current thread: