Re: Remote power cycle recommendations

[Ben Cannon <ben () 6by7 net>]

Third for the APC9211, though I’ll add that you might “think” you only want one outlet now, but once you have the 
ability you will invariably want to control more ;)

-Ben

> On Apr 27, 2018, at 10:21 AM, Brielle Bruns <bruns () 2mbit com> wrote:
>
> > On 4/27/2018 11:03 AM, William Herrin wrote:
> > > On Fri, Apr 27, 2018 at 11:46 AM, Andy Ringsmuth <andy () newslink com> wrote:
> > > I’m sure many here are familiar with or using/have used devices to remotely power cycle equipment. I’m considering 
> > > a Dataprobe iBoot-G2 and am curious if you’ve had experience with it, or other recommendations.
> > >
> > > I only need one outlet to be remotely power cycle-able. I have one piece of equipment that is occasionally a little 
> > > flaky and, well, you know the hassle.
> > The ancient (read: cheap used) APC AP9211's still get the job done.
> > Regards,
> > Bill Herrin
>
> Def can't recommend the AP9211s enough to people needing remote power control.  You should be able to put the more 
> modern AP961X series of cards in it as well.  The AP9617 is the basic module, the 9619 has environmental monitoring, 
> and the 9618 has both the environmental stuff plus an analog modem.
>
> The management modules can be reloaded with various types of firmware to make them compatible with everything from 
> the rack mount PDUs to Symmetras and the run of the mill desktop or rack mount UPSs.
>
> -- 
> Brielle Bruns
> The Summit Open Source Development Group
> http://www.sosdg.org    /     http://www.ahbl.org