nanog mailing list archives

SV: Cisco NCS5501 as a P Router


From: Gustav Ulander <gustav.ulander () telecomputing se>
Date: Sat, 27 May 2017 14:42:37 +0000

Hello.
We are running 5001 also and we have the same issue with it programming the wrong entry into the hardware. 
Interesting to hear that the issue is still in 6.1.2 since we were thinking about upgrading to that one to see if it 
fixes the issue but I think we will give it a pass. 
Seems the BU cant find why its happening only that it indeed is happening. They don’t seem to be able to duplicate it 
in the lab either last we heard. 

/Gustav


-----Ursprungligt meddelande-----
Från: NANOG [mailto:nanog-bounces () nanog org] För Radu-Adrian Feurdean
Skickat: den 27 maj 2017 11:31
Till: nanog () nanog org
Ämne: Re: Cisco NCS5501 as a P Router

On Thu, May 18, 2017, at 15:21, Erik Sundberg wrote:
We're at the growing point where we need a dedicated P router for a 
core device. We are taking a serious look at the NCS5501. Is there 
anyone else using a NCS5501 as P Router or just general feedback on 
the NCS5501 if you are using it?

Hi,

While we're not using the NCS5501, we do use the "previous version", NCS5001. We're not yet at a point to care about 
the minuscule buffers.
Set-up : initially P-router in a very small BGP-free core (ISIS + LDP), then added route-reflector functionality too. 

As a P-router they usually behave correctly, except for the some cases where they start routing incorrectly (according 
to Cisco, the wrong label is programmed into hardware). That should have been fixed with 6.1.2, which we have deployed, 
until we recently had the same issue on 6.1.2, on the exact same box. We expect having some fun with the TAC about that.
 
The big downside is it's only has a single processor

Yes, but:
 - it's powerful enough (we ended-up using them as RR too, and ~1.2M  routes in RIB pose no problem)
 - ours being about half the price of a 5501, we have 2 of them on every  site. If you can afford the same (2 / site) 
do it; If you don't -  review the copy so that you can (Brocade SLX 9540 looks like a good  alternative).

Current thread: