nanog mailing list archives
Re: Low Cost 10G Router
From: Mark Tinka <mark.tinka () seacom mu>
Date: Wed, 20 May 2015 08:01:41 +0200
On 19/May/15 23:59, Rodrigo 1telecom wrote:
I know if is not possible to have a full routing on ex3300(low memory for it) , but i never tried to do a default router on it( with EFL licence and software above version 12) I have many bgp session with cisco 3750 switchs.. Traffic about 2gb on it... Have a peer( ebgp customer) with a acx2000( i know it have 10gb port) we send to this router a default route only... And it have 1.5gb with us and more 1gb with other link provider...
If you need a full table in FIB, then you're stuffed with any switch vendor out there. But if your switch vendor is able to hold the full table in RIB, and allow you to selectively hold chosen routes in FIB, then you could get away with lots of 10Gbps-capable switches at a reasonable price. Mark.
Current thread:
- Re: Low Cost 10G Router, (continued)
- Re: Low Cost 10G Router Colton Conor (May 19)
- Re: Low Cost 10G Router Ray Soucy (May 19)
- Re: Low Cost 10G Router Joe Greco (May 19)
- Re: Low Cost 10G Router Ken Chase (May 19)
- Re: Low Cost 10G Router Joe Greco (May 19)
- Re: Low Cost 10G Router Pavel Odintsov (May 19)
- Re: Low Cost 10G Router charles (May 19)
- Re: Low Cost 10G Router Pavel Odintsov (May 19)
- Re: Low Cost 10G Router Rodrigo 1telecom (May 19)
- Re: Low Cost 10G Router Rodrigo 1telecom (May 19)
- Re: Low Cost 10G Router Mark Tinka (May 19)
- Re: Low Cost 10G Router Joe Greco (May 19)
- Re: Low Cost 10G Router Keefe John (May 19)
- Re: Low Cost 10G Router Justin Wilson - MTIN (May 19)
- Re: Low Cost 10G Router Mel Beckman (May 19)
- Re: Low Cost 10G Router Pavel Odintsov (May 19)
- Re: Low Cost 10G Router Mel Beckman (May 19)
- Re: Low Cost 10G Router Faisal Imtiaz (May 19)
- Re: Low Cost 10G Router Colton Conor (May 19)
- Re: Low Cost 10G Router Josh Baird (May 19)
- Re: Low Cost 10G Router Colton Conor (May 20)
- Re: Low Cost 10G Router Rafael Possamai (May 20)