Re: IPv6 Default Allocation - What size allocation are you giving out

[Faisal Imtiaz <faisal () snappytelecom net>]

Fair point....

just as a follow up question... is giving a /64 to a Residential Customer not a good idea, because it would not allow 
them to have additional routed segments ? (since Best Practices is to use a /64 on each link as link connectivity 
address) or is there some other reasoning that I am failing to see/ understand ?


Faisal Imtiaz
Snappy Internet & Telecom

----- Original Message -----
> From: "Philip Dorr" <tagno25 () gmail com>
> Cc: nanog () nanog org
> Sent: Wednesday, October 8, 2014 11:54:36 PM
> Subject: Re: IPv6 Default Allocation - What size allocation are you giving out
>
> You should probably increase those allocations.
>
> Residential & Small Business Customers:   /56
>
> Medium & Large size Business Customers: /48
>
> Multi-location Business Customer: /48 per site
>
> On Wed, Oct 8, 2014 at 10:37 PM, Faisal Imtiaz <faisal () snappytelecom net>
> wrote:
> > We are going thru a similar process.. from all of my reading, best practice
> > discussions etc..
> >
> > Here is what i have understood so far:-
> >
> > Residential Customers:   /64
> >
> > Small & Medium size Business Customers: /56
> >
> > Large Business size or a multi-location Business Customer: /48
> >
> > Don't skimp on allocating the subnets like we do on IPv4
> > Better to be 'wasteful' than have to come back to re-number or re-allocate
> > .
> >
> > Regards
> >
> >
> > Faisal Imtiaz
> > Snappy Internet & Telecom