nanog mailing list archives
Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing
From: Mark Tinka <mark.tinka () seacom mu>
Date: Wed, 30 Jul 2014 15:40:28 +0200
On Wednesday, July 30, 2014 03:06:55 PM Jimmy Hess wrote:
I would generally suggest you look at it as a long term decision, at least before jumping to the next incremental (modest increase) on the upgrade treadmill. It depends on whether the 6500 is still a perfect match for your network other than the prefix limit. Your vendor should think of your equipment as an "investment" to be protected, by exploiting your feelings of loss aversion, but the upgrade treadmill is a trap..... next thing you know, you will have to replace the chassis, then you will need new linecards......
Next up the road are the 6800's. Essentially SUP-2T's, so you get software parity Day One, but still the same supervisor module. We are running 6880's (which are the fixed SUP-2T's, but with modular line cards), but only a core switching (Layer 2 Ethernet) role. Great port density since the 10Gbps ports are now SFP+, but oversubscribed line cards 2:1, since each slot is 80Gbps, but the line card comes with 16x 10Gbps ports. You can disable oversubscription and go into performance mode, which disables half the ports on the line card - we do that. IP-/MPLS-wise, whatever you can do on the 6500 you can do on the 6800, but I can't say for sure as we're running them as switches. That said, if your goal is IP, just consider the ASR9000, MX, and whatever else other vendors can do in this space. Mark.
Attachment:
signature.asc
Description: This is a digitally signed message part.
Current thread:
- Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Corey Touchet (Jul 29)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Simon Lockhart (Jul 29)
- RE: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing John van Oppen (Jul 29)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Jimmy Hess (Jul 30)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Mark Tinka (Jul 30)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Saku Ytti (Jul 30)
- Message not available
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing vristevs (Jul 29)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Simon Lockhart (Jul 29)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Mark Tinka (Jul 30)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Vincent Bernat (Jul 30)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Mark Tinka (Jul 30)
- Re: Upgrade Path Options from 6500 SUP720-3BXL for Edge Routing Vincent Bernat (Jul 30)