nanog mailing list archives
Re: Recommendation on NTP appliances/devices
From: Saku Ytti <saku () ytti fi>
Date: Fri, 4 Apr 2014 16:24:57 +0300
So what, that sends IP packets, are you using to *measure* it. I can
Agilent if we need unidir. Normal run-of-the-mill 10GE SP router will give you low single digit microsecond jitter when not congested. (You can run 99.99% no problem, as long as you don't try >100% (i.e. >1 interface sending)). We only do bidir for constant measurements of network, unidir is unfortunately only for troubleshooting case-by-case. It would be very nice to always have unidir view to the network, but cost/benefit is not there if you have lot of pops. -- ++ytti
Current thread:
- Re: Recommendation on NTP appliances/devices, (continued)
- Re: Recommendation on NTP appliances/devices Berry Mobley (Apr 03)
- Re: Recommendation on NTP appliances/devices Rob Seastrom (Apr 03)
- Re: Recommendation on NTP appliances/devices Chris Adams (Apr 03)
- Re: Recommendation on NTP appliances/devices Rob Seastrom (Apr 03)
- Re: Recommendation on NTP appliances/devices George Herbert (Apr 03)
- Re: Recommendation on NTP appliances/devices Will Orton (Apr 03)
- Re: Recommendation on NTP appliances/devices Saku Ytti (Apr 03)
- Re: Recommendation on NTP appliances/devices Julien Goodwin (Apr 04)
- Re: Recommendation on NTP appliances/devices Saku Ytti (Apr 04)
- Re: Recommendation on NTP appliances/devices Julien Goodwin (Apr 04)
- Re: Recommendation on NTP appliances/devices Saku Ytti (Apr 04)
- Re: Recommendation on NTP appliances/devices Dan Drown (Apr 04)
- Re: Recommendation on NTP appliances/devices Rob Seastrom (Apr 03)
- Re: Recommendation on NTP appliances/devices Berry Mobley (Apr 03)
- Re: Recommendation on NTP appliances/devices bmanning (Apr 03)