nanog mailing list archives

Re: quietly....


From: Mark Andrews <marka () isc org>
Date: Thu, 03 Feb 2011 11:45:12 +1100


In message <1397B616-F7F5-4212-B055-C0DFE1A99E3C () muada com>, Iljitsch van Beijnum write
s:
On 2 feb 2011, at 21:36, Lamar Owen wrote:

<put on op hat>
What I want is to add an IPv6 subnet or subnets to my already tuned =
DHCP server config, add IPv6 addresses to the addresses handed out (in =
the same config clause as the IPv4 addresses are stored, preferably), =
update the DHCP server software to IPv6-capability, restart the DHCP =
server, and both IPv4 and IPv6 clients get what they need, through the =
same already locked down channels, with no other upgrades required.

You can do that today. For instance, this is what I have in a test =
setup. (However, the ISC dhcpd can only do either v4 or v6, not both at =
the same time.)

Which is a limitation that we intend to address.  It was more time
sensitive to get a DHCPv6 server out there than a integrated
DHCPv4/DHCPv6 server.  No date has been set for this yet.

subnet6 2001:960:7bf:d::/64
  {
    option dhcp6.name-servers 2001:1af8:2:5::2;
    option dhcp6.domain-search "bonjour.muada.nl";
    range6 2001:960:7bf:d::1000 2001:960:7bf:d::1fff;
  }

Mark
-- 
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742                 INTERNET: marka () isc org


Current thread: