nanog mailing list archives

Re: Home CPE choice


From: Owen DeLong <owen () delong com>
Date: Wed, 31 Mar 2010 23:09:51 -0700

Having significant experience with all three products, I will strongly suggest
going with the SRX-100 if at all possible.  It's real JunOS, even if it does take
a bit of bludgeoning to get it to stop impersonating a netscreen security model.

It's the same price the NS5GTs used to sell for ~$5-600 (512MB/1G) and has
a great deal more to offer (like fully functional routing protocols and JunOS
configuration environment).

Most of the NS5GTs I ever deployed in always-on environments didn't last
more than about 3-4 years.  The SSG-5s I've dealt with haven't started
dying yet, but, most of them are only about 2 years old.

Owen

On Mar 31, 2010, at 7:39 PM, jonesnco () gmail com wrote:

Netscreen 5GTs will also do IPv6 with some ScreenOS 5.4 code revs (5.4.0r10.0 for sure). Those pop up on Ebay for 
$60ish and make respectable home CPE devices. Not quite the horsepower of the SSG5 but they seem to hold up 
reasonably well.

Dan Jones

Juniper's SSG5 and SRX100 are nice options for home. I've enjoyed an SSG5
for awhile now. SRX100 for junos. SSG5's pop up on ebay occasionally for a
few $100.

-Iain

On Wed, Mar 31, 2010 at 4:18 PM, Marty Anstey <marty.anstey () sunwave net>wrote:



Hopefully this e-mail is considered operational content :)


The recent thread on the new linkys kit and ipv6 support got me
thinking about CPE choice.

What good off the shelf solutions are out there? Should one buy the
high end d-link/linksys/netgear products? I've had bad experiences
with those (netgear in particular).

Should one get a "real" cisco router? The 877 or something? Maybe an
ASA or the new small business targeted ISR (can't recall the model
number off hand right now). There is mikrotik but I'm not so sure
about the operating system.

Is there a market for a new breed of CPE running OpenWRT or pfsense on
hardware with enough CPU/RAM to not fall over?

Granted that won't cost $79.00 at best buy. However it seems to me
that decent CPE is going to run a couple hundred dollars in order to
have sufficient ram/cpu.

My current home router is a cisco 1841. I keep my 6mbps DSL line
pretty much saturated all the time. Often times my wife will be
watching Hulu in the living room, I'll be streaming music and running
torrents (granted I have tuned my Azures client fairly well) all at
the same time and it's a good experience. Running that kind of
traffic load through my linksys would cause it to need a reboot once
or more a day.

What are folks here running in SOHO environments that doesn't require
too frequent oil changes :)


I run FreeBSD on a PIII; I can easily saturate my 15mbit cable
connection without it breaking a sweat. I also have a couple Cisco
2610's, one of which is my ipv6 tunnel endpoint.

-M







--
-- -
Iain Morris
iain.t.morris () gmail com



Current thread: