nanog mailing list archives

Re: ios images ?


From: "Alex P. Rudnev" <alex () Relcom EU net>
Date: Wed, 11 Mar 1998 20:46:08 +0300 (MSK)

OK. Try to get PA-E3 cards support or ISL by fast ethernet at I/O board 
with any IOS except 11.1(17.3)CAA ...

They incorporate new equipment into 11.1(...)CAA first, not into 
11.2(xx)P.



On Wed, 11 Mar 1998, Dustin Goodwin wrote:

Date: Wed, 11 Mar 98 10:57:09 -0500
From: Dustin Goodwin <dustin_goodwin () smb com>
To: nanog () merit edu, stuartb () grasshopper paradox net au
Subject: Re: ios images ?


     11.2(12) or higher is suppose to go GD. 11.1 and 11.3 are in serious 
     question as far as ever reaching GD status. If you want full support 
     from Cisco TAC run a GD version and run the mainline. Don't run P 
     train or a none GD release. This will limit your in terms of hardware. 
     For instance the RSP4 is a 11.2P feature not 11.2 feature. That is the 
     safest most conservative position to take. Of course it is the least 
     fun in terms of new software features and new hardware. But no one 
     ever got fired for running a GD mainline release. 
     
     - Dustin -


______________________________ Reply Separator _________________________________
Subject: ios images ?
Author:  Stuart Bryant <stuartb () grasshopper paradox net au> at sb-entsmtp
Date:    3/11/98 9:53 AM


hi,
   were looking at various ios images to use so we can standardise across
  the network. were looking at ios version 11.2(9)P or 11.2(10)P
     
   does anyone have any warstories to share about these ? good points/bad
 points ? things i should be watch out for ?
     
  regards,
     
stuart bryant      stuartb () paradox net au     cabinet maker/plumber 
paradox digital        ph +61 8 9201 9201         f +61 8 9201 9200
               founding member: fellowship of beer. 
                      i used to bite (tm)
     




Aleksei Roudnev, Network Operations Center, Relcom, Moscow
(+7 095) 194-19-95 (Network Operations Center Hot Line),(+7 095) 239-10-10, N 13729 (pager)
(+7 095) 196-72-12 (Support), (+7 095) 194-33-28 (Fax)



Current thread: