Full Disclosure mailing list archives

Re: scada/plc gear


From: b9u4ea <b9u4ea () gmail com>
Date: Tue, 8 Jan 2008 23:16:00 -0600

Looks like a fantastic and robust little tool :)  That is certainly
some rather odd behaviour...  The fact that the other ports remained
makes it likely an application (modbus) problem.  Was it an ethernet
to rs232 converter?  (I obviously didn't look up the part number).
Did you happen to catalogue the 'crud' which you sent prior to
failure?  I know particular header options have unexpected results a
great deal of control systems.  I also know particular vendor's ip
stack implementations have been known to be produced some very things,
eg, odd ip options (off the top of my head the AB series of PLCs).
Now I'm curious, what other devices are you testing?

On Jan 7, 2008 6:47 PM, gmaggro <gmaggro () rogers com> wrote:
http://www.modbus.org/docs/Modbus_Application_Protocol_V1_1b.pdf.
For example: http://www.modbus.pl/download/zxy66/v19/modbus_perl_client.zip

Thank you for the links.

I like the following: http://www.modbusdriver.com/modpoll.html

"modpoll is a command line based Modbus master simulator and test
utility". There's binaries for a few different platforms. Enough to get
someone speaking modbus/tcp over the wire and the ability to read device
registers, coils, what have you.

you spend 2 minutes with google you'll find more then you'll need.

Agreed, but part of what I want to help accomplish is a weeding of the
crud, saving folks some time. Hopefully not annoy people with too much
'cocking stupid' crap.

 Anyways, enjoy your research...

Oh, I am! That Kohler Power systems box, turns out, wasn't as robust as
I hoped. It was built around a Lantronix Xport embedded ethernet device
server, I think an Xport-485
(http://www.lantronix.com/pdf/XPort-485_DS.pdf and/or
http://www.lantronix.com/pdf/XPort_PB.pdf).

At first it held up a couple days, but after pounding it with random
crud (on various ports) 502/tcp stopped showing up. Attempts to get 502
to show up again, by multiple power cyclings and leaving it off for
extended periods, made no difference. The only things that continued to
show up reliably were 69, 9999, 80 and 161.

Tried to find a way to reset it, either by the configuration menus or
hardware (I took the case off) but had no luck. Attempted a reset via
upgrading its firmware with the 'Device Installer' util (came with it on
CD), but wound up bricking it so I couldn't continue. Now I can't play
with it anymore and tell if 502 dropping off was some kind of a fluke or
what the story is. I'm going to ignore it as an anomaly since I can't
repeat it.

So I ripped open the Xport module. That thing is quite the little
marvel, a couple BGAs (an Atmel and a Lantronix DSTni-EX) and assorted
glue crammed in behind an RJ45. Wonder how commonly used they are.
Written on the small metal case was "GM42501 Rev 2.0 (Modbus)" and
"XP1001000-03-GC, Rev. A11" among other things.

1 piece of gear down, 5 more to go :)






_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.grok.org.uk/full-disclosure-charter.html
Hosted and sponsored by Secunia - http://secunia.com/


_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.grok.org.uk/full-disclosure-charter.html
Hosted and sponsored by Secunia - http://secunia.com/


Current thread: