Re: PIX 515E config - DMZ host to inside host

[<John.Crissup () us millwardbrown com>]

 I would simply conifgure the internal subnet to map to the DMZ with no
address translation.  So, using "static (internal,dmz) 10.133.24.0
10.133.24.0 netmask 255.255.255.0" would allow the computer at
10.134.1.2 to simply access 10.133.24.3 directly.


--
John


-----Original Message-----
From: Chris Mitchell

PIX newbie here, not really a firewall guy but need to get some stuff
done with it, and am pretty good at basic configs. I have a 515E with 3
interfaces (inside, outside, DMZ)- I need to allow access from a host in
the DMZ to an internal host.

DMZ host - 10.134.1.2
Internal host - 10.133.24.3

==================================================== 
This email is confidential and intended solely for the use of the 
individual or organization to whom it is addressed. Any opinions or 
advice presented are solely those of the author and do not necessarily 
represent those of the Millward Brown Group of Companies.  If you are 
not the intended recipient of this email, you should not copy, modify, 
distribute or take any action in reliance on it. If you have received 
this email in error please notify the sender and delete this email 
from your system. Although this email has been checked for viruses 
 and other defects, no responsibility can be accepted for any loss or 
damage arising from its receipt or use. 
==================================================== 

_______________________________________________
firewall-wizards mailing list
firewall-wizards () listserv icsalabs com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards