RE: Help Request -- Firewall-1 Link Down

[jrg () gbnet net (James R Grinter)]

those of you using qfe cards, and needing varying configs on
different ports might find the following useful (courtesy a friend
who's just been working on this very problem):

(note caveat if you have multiple qfe cards in a box)

> > Also we have finished testing of the NAFO Full duplex issue.  It is possible
> > to 
> > set the driver settings in the /kernel/drv/qfe.conf file as follows
>
> > name="qfe" class="sbus"
> > reg=0x0,0x8c20000,0x00000108,0x0,0x8c22000,0x00002000,0x0,
> > 0x8c24000,0x00002000,0x0,0x8c26000,0x00002000,0x0,0x8c27000,
> > 0x00000020
> > adv_autoneg_cap=0 adv_100fdx_cap=1 adv_100hdx_cap=0 adv_10fdx_cap=0
> > adv_10hdx_cap=0;
>
> > Where the registers are gained from the prtconf -v output for each instance
> > of 
> > the card.
>
> > Please note that there is a minor issue.  When you set the reg it will
> > propogate 
> > to each instance symmetrically on each card as they share the same
> > registers.  
> > You are unable to set the exact instance within the qfe.conf file.
>
> > EG if you try and set in for instance 1 and have a second card it will also
> > set 
> > it for instance 5 etc and vica versa.  This is being looked into.