tcpdump mailing list archives
Re: Accurate ECN support in tcpdump/libpcap
From: "Scheffenegger, Richard via tcpdump-workers" <tcpdump-workers () lists tcpdump org>
Date: Tue, 5 Sep 2023 08:50:36 +0000
--- Begin Message --- From: "Scheffenegger, Richard" <Richard.Scheffenegger () netapp com>
Date: Tue, 5 Sep 2023 08:50:36 +0000
Hi Francois-Xavier!I think there's an ambiguity here.I respect your opinion on this; It would be nice to hear the opinions of more people using and improving tcpdump. Currently it seems to me, that only you and I have particularly strong convictions about the abbreviation letter...If you think this is a problem for the new flag, have you considered modifying the two tools you mention with two small patches?It's not the change in packetdrill by itself that I'm worried about, but all the deployed and productive regression testing scripts already using the "A" (and 0..7) notation. At this stage it probably would be easier to sed "s/N/A/" on the tcpdump output when creating a new script from tcpdump captures. My packetdrill scripts tend to use the "A" notation only during the handshake and then use the numerical notation supported by packetdrill. But I know that many of the scripts in the Linux world don't make use of the numerical notation for in-session header flags. Adding the maintainer of packetdrill and the author of the wireshark patch for their view on this.Thus my proposal to use "N", last letter of "Accurate ECN", as already suggested in some PR comments and a previous message. Mnemonic: "Accurate EC[N]" or "[N]ew TCP scheme/mechanism". Alternatives: - "M" from "[M]ore Accurate Explicit Congestion Notification", from your draft title. - "G" from "TCP Pra[G]ue", perhaps less mnemonic.From these, I could accept the "N" for the historic precedent (Nonce Sum bit) and "Accurate EC[N]" if others support that too. I maintain that "A" is most appealing to me, the other alternatives I'm not really fond of; BTW - TCP Prague is more than just the AccECN signalling; you have changed IP ECN use (ECT(1) instead of ECT(0)), but most importantly, the congestion control mechanisms is based around DCTCP, and Loss recovery is based upon RACK (as a typical starting point)s/for a couple months/for 2 years and half/ Your Proposal to packetdrill: Jan 18, 2020. Your PR to tcpdump: Jul 27, 2022. Denis questions: Oct 23, 2022. No answer until Jul 23, 2023.Indeed. Technically, Jul 2022 to Jul 2023 is 12 months, which fits with couple of months. Prior to that, the tcpdump project has had no formal knowledge... Originally (2020) I had not properly set up the git repository and was only reminded about this at the IETF114 hackathon. Denis email response to me was unfortunately earmarked as junk due to the long time difference of July 2022 to October 2022 - I presume the filter wasn't expecting an answer after almost 3 months... I only unburied it during the IETF117 hackathon. And matters got delayed a bit more with the recent issues around this lists mailman. In order to make some progress, I suggest to split off the part of the patch, which allows access to all 12 TCP header flags, and submit that separately; This could be committed together with the adjacent change to libpcap (the parser decoding the literal "tcp[tcpflags]" string to provide also all 12 flag bits. Would that be agreeable? Richard Scheffenegger -----Original Message----- From: Francois-Xavier Le Bail <devel.fx.lebail () orange fr> Sent: Dienstag, 5. September 2023 09:35 To: Scheffenegger, Richard <Richard.Scheffenegger () netapp com>; tcpdump-workers () lists tcpdump org Subject: Re: [tcpdump-workers] Re: Accurate ECN support in tcpdump/libpcap NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe. On 29/08/2023 16:34, Scheffenegger, Richard via tcpdump-workers wrote:And some initial discussions which aren't yet reflected on the mailing list: -----Original Message----- From: Scheffenegger, Richard Sent: Freitag, 18. August 2023 14:01 To: Francois-Xavier Le Bail <devel.fx.lebail () orange fr>; tcpdump-workers () lists tcpdump org Cc: Denis Ovsienko <denis () ovsienko info>; Guy Harris <gharris () sonic net>; [...] ; Michael Richardson <mcr () sandelman ca>; [...] Subject: RE: Accurate ECN support in tcpdump/libpcap (Adding everyone who has participated in the discussion so far, since it seems that tcpdump-workers mailman is not working, as well as a number of additional recent committers and participants)[...]I do not think there is ambiguity here.Hi Richard, I think there's an ambiguity here. Using "A" as the new TCP flag for tcpdump is a mistake because it sounds like "ACK" (even if tcpdump prints "." for "ACK"). Thus my proposal to use "N", last letter of "Accurate ECN", as already suggested in some PR comments and a previous message. Mnemonic: "Accurate EC[N]" or "[N]ew TCP scheme/mechanism". Alternatives: - "M" from "[M]ore Accurate Explicit Congestion Notification", from your draft title. - "G" from "TCP Pra[G]ue", perhaps less mnemonic.Tcpdump - any every tool afterwards - has been using "." for ACKs.This is incorrect. Wireshark, for example, does not use "." for ACKs."N" had been in (very rare) use for the NS bit (RFC3540), which is now obsolete (https://datatracker.ietf.org/doc/status-change-ecn-signaling-with-nonces-to-historic/). While this is the same bit (and arguably, the authors of RFC3540 could have made more effort to get that bit adopted in tooling back in 2001-2003), the semantics are dramatically different than the current use. "A" has never been in use before, as a single character abbreviation,This is incorrect. Wireshark uses "A" for "ACK". (e.g. TCP Flags: ····C··A··S·) ------------------------^and is in use for the last 2+ years in other tooling around packet mangling, tracing, decoding and forging such as wireshark and packetdrill... (and yes, I did let the ball drop with tcpdump for a couple months, when all the other tools were updated reflecting the "A" char change there, which was completely uncontentious in those communities).I suspect it would create more confusion, if tcpdump was using a different mapping, than other toolsThere are already some different mapping between, for example, Wireshark and tcpdump: ACK: "." for tcpdump, "A" for Wireshark. CWR: "W" for tcpdump, "C" for Wireshark. If you think this is a problem for the new flag, have you considered modifying the two tools you mention with two small patches? Wireshark, for example, prints "AE" without -V, e.g. "[SYN, ECE, CWR, AE]". No "A" alone here. And the only place where the new "A" appears is with -V: TCP Flags: ···ACE····S· --------------^ It appears with: "...1 .... .... = Accurate ECN: Set" If it's a problem, it could easily be changed to e.g. "N", with a little patch. Same for packetdrill.(just like with the "." for Ack, which is in common use throughout those very same tools).And again « the "." for Ack » is not used by Wireshark, one of « those very same tools ».Another interesting aspect which I would be keen on learning, if per-session stateful decoding is something that the tcpdump community would entertain. Once the AccECN handshake (in a SYN) was seen, subsequently the AE, ECE and CWR bits together form the ACE counter. In packetdrill and also wireshark this gets then decoded numerically (0..7) instead of having one character per bit...This per-session stateful session decoding could be examined later...Best regards, RichardBest regards, François-----Original Message----- From: Francois-Xavier Le Bail <devel.fx.lebail () orange fr> Sent: Freitag, 18. August 2023 13:20 To: Scheffenegger, Richard <Richard.Scheffenegger () netapp com>; tcpdump-workers () lists tcpdump org Subject: Re: Accurate ECN support in tcpdump/libpcap NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe. On 18/08/2023 09:55, Scheffenegger, Richard wrote:Hi, I’ve been asked to reach out to this mailing list, to gather some feedback around the support for tcpdump to properly decode the upcoming (WGLC) Accurate ECN signalling enhancement, which is part of the L4S (low loss, low latency, scalable) effort, ultimately culminating in a variant of TCP called TCP Prague: Here is the change to tcpdump – adding the additional “A” TCP header flag bit; Since the ACK bit has traditionally been mapped to “.”, and the refurbished former Nonce bit #9 in the 12-bit TCP header flags field has been named “AE” (Accurate ecn Enable), the code changes to other tools such as Wireshark and Packetdrill are using the mapping to the character “A” (or decode Accurate ECN stateful into the ACE counter value of 0..7)Hi, Even if tcpdump prints the "ACK" flag with a ".", "A" is ambiguous precisely because of "ACK". We should use "N" for the new flag, last letter of "Accurate ECN", to avoid this ambiguity, as already suggested in a PR comment.
--- End Message ---
_______________________________________________ tcpdump-workers mailing list -- tcpdump-workers () lists tcpdump org To unsubscribe send an email to tcpdump-workers-leave () lists tcpdump org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
Current thread:
- Accurate ECN support in tcpdump/libpcap Scheffenegger, Richard via tcpdump-workers (Aug 29)
- <Possible follow-ups>
- Re: Accurate ECN support in tcpdump/libpcap Scheffenegger, Richard via tcpdump-workers (Aug 29)
- Re: Accurate ECN support in tcpdump/libpcap Francois-Xavier Le Bail (Sep 05)
- Re: Accurate ECN support in tcpdump/libpcap Scheffenegger, Richard via tcpdump-workers (Sep 05)
- Re: Accurate ECN support in tcpdump/libpcap Michael Tuexen (Sep 05)
- Re: Accurate ECN support in tcpdump/libpcap Francois-Xavier Le Bail (Sep 05)
- Re: Accurate ECN support in tcpdump/libpcap Michael Richardson (Sep 03)
- Message not available
- Re: Accurate ECN support in tcpdump/libpcap Scheffenegger, Richard via tcpdump-workers (Aug 31)
- Message not available
- Re: Accurate ECN support in tcpdump/libpcap Scheffenegger, Richard via tcpdump-workers (Sep 03)