Re: cheap MPLS router recommendations

[Ryan Hamel <ryan () rkhtech org>]

It can handle a few full tables, but the performance of an MX80/MX104 is nearly the same as the EX4200 switch.

Ryan
On Oct 16 2020, at 4:41 pm, Tony Wicks <tony () wicks co nz> wrote:
> Well, there is always the MX104 (if you want redundancy) or MX80 if you don’t. That will give you 80gig wire speed 
> just don’t load it up with more than one full table.
>
>
> From: adamv0025 () netconsultings com <adamv0025 () netconsultings com>
> Sent: Saturday, 17 October 2020 10:57 am
> To: 'Tony Wicks' <tony () wicks co nz>
> Cc: nanog () nanog org
> Subject: RE: cheap MPLS router recommendations
>
>
>
>
>
> For this particular gig even the MX204 would be overkill in terms of price as well as performance.
> Ideally something like 204 but with only those 8 10/1G ports (i.e. without the 4x100G ports)
>
> adam
> From: Tony Wicks <tony () wicks co nz (mailto:tony () wicks co nz)>
> Sent: Friday, October 16, 2020 10:36 PM
> To: adamv0025 () netconsultings com (mailto:adamv0025 () netconsultings com)
> Cc: nanog () nanog org (mailto:nanog () nanog org)
> Subject: RE: cheap MPLS router recommendations
>
>
>
>
>
> Juniper MX204, easy