RE: Brocade CER MPLS

["Fawcett, Nick via NANOG" <nanog () nanog org>]

All mpls-interfaces are listed and policy is just traffic-eng ospf.

Nick

From: James Cornman <james () atlanticmetro net>
Sent: Wednesday, November 13, 2019 2:43 PM
To: Fawcett, Nick <nfawcett () corp mtco com>
Cc: nanog () nanog org
Subject: Re: Brocade CER MPLS

Ensure that 'mpls-interface xxx' is on for all of the interfaces, and also ensure that any traffic-engineering options 
match on both sides.  "show mpls lsp detail" should show some other info that may be helpful here.

On Wed, Nov 13, 2019 at 3:24 PM Fawcett, Nick via NANOG <nanog () nanog org<mailto:nanog () nanog org>> wrote:
I have one CER (let’s call him Charlie) that is not able to build an LSP tunnel to another CER.  Shows “Currently found 
no route. Will schedule for retry”.  Both CER’s can ping and traceroute each other.  When I had the LSP to the 
destination router (Snoopy) it adds the LSP and shows UP in status field.  Both have the same number of routes in their 
ospf table.  Charlie has other LSP’s built to other CER’s on the network with productive VLL’s and VPLS’s.  I have 
removed both lsp’s from both Charlie and Snoopy and re-added them and only one Snoopy’s LSP comes up.  Any ideas?

Nick

--

Checked by SOPHOS http://www.sophos.com


--

James Cornman

Chief Technology Officer
jcornman () atlanticmetro net<mailto:jcornman () atlanticmetro net>
212.792.9950 - ext 101

Atlantic Metro Communications

4 Century Drive, Parsippany NJ  07054

Cloud Hosting • Colocation • Network Connectivity • Managed Services

Follow us on Twitter: @atlanticmetro<https://twitter.com/atlanticmetro> • Like us on 
Facebook<https://www.facebook.com/atlanticmetro>
www.atlanticmetro.net<https://www.atlanticmetro.net/>



--

Checked by SOPHOS http://www.sophos.com