nanog mailing list archives
Re: Power cut if temps are too high
From: Brandon Ross <bross () pobox com>
Date: Mon, 27 May 2019 18:10:49 -0400 (EDT)
On Mon, 27 May 2019, Brian Kantor wrote:
A simple air conditioner thermostat wired to the EPO switch. For safety, wire two thermostats in series so BOTH have to trip before power is shut off.
Admittedly it's been a long time since I worked with basic circuitry, but wouldn't wiring them in series cause the circuit to be interrupted if EITHER thermostat tripped?
-- Brandon Ross Yahoo: BrandonNRoss Voice: +1-404-635-6667 ICQ: 2269442 Signal Secure SMS, Viber, Whatsapp: +1-404-644-9628 Skype: brandonross Schedule a meeting: http://www.doodle.com/bross
Current thread:
- Power cut if temps are too high Dovid Bender (May 27)
- Re: Power cut if temps are too high Brian Kantor (May 27)
- Re: Power cut if temps are too high Mel Beckman (May 27)
- Re: Power cut if temps are too high Wayne Bouchard (May 28)
- Re: Power cut if temps are too high Brandon Ross (May 27)
- Re: Power cut if temps are too high Brian Kantor (May 27)
- Re: Power cut if temps are too high Mel Beckman (May 27)
- Re: Power cut if temps are too high Owen DeLong (May 27)
- Re: Power cut if temps are too high Mel Beckman (May 27)
- Re: Power cut if temps are too high Brian Kantor (May 27)
- Re: Power cut if temps are too high Mel Beckman (May 27)
- Re: Power cut if temps are too high Haudy Kazemi (May 27)
- Re: Power cut if temps are too high bzs (May 28)
- Re: Power cut if temps are too high Owen DeLong (May 28)
- Re: Power cut if temps are too high bzs (May 28)
- Re: Power cut if temps are too high Owen DeLong (May 28)
- Re: Power cut if temps are too high Haudy Kazemi (May 27)