Re: DSLAMs

[Shawn L via NANOG <nanog () nanog org>]

That's a tough one.  48 port dslams with internal splitters are easy.  When you're looking for more density you're 
almost always looking at external splitter shelves.  Could also look at the calix c7 platform -- tons around on the 
used market -- but then again, no splitters.
 

-----Original Message-----
From: "Dennis Lundström" <dennis () umnum ca>
Sent: Tuesday, December 31, 2019 12:32pm
To: "Nick Edwards" <nick.z.edwards () gmail com>
Cc: "NANOG" <nanog () nanog org>
Subject: Re: DSLAMs




Found this one:

[ ftp://ftp2.dlink.com/SUPPORT/End_of_Life_Product_List_091519.pdf ]( 
ftp://ftp2.dlink.com/SUPPORT/End_of_Life_Product_List_091519.pdf )
Stating EOL 2015-04-14 for HW revision A1.
—Dennis



On Tue, Dec 31, 2019 at 10:27 Nick Edwards <[ nick.z.edwards () gmail com ]( mailto:nick.z.edwards () gmail com )> 
wrote:Howdy y'all

 Chasing some info, does dlink still sell DAS4672 - 672 port adsl2+ dslams?

 after simple IP based  units with pppoe pass through.
 We could buy a bunch of planet 48 ports, which we used before, but we
 hoping someone still puts out high capacity (320 plus port) units with
 inbuilt pots splitters

 thanks