nanog mailing list archives
Re: telnet into a netgear switch?
From: David Birdsong <david () imgix com>
Date: Mon, 25 Nov 2013 20:51:29 -0800
On Mon, Nov 25, 2013 at 5:18 PM, Pedro Cavaca <pmsac.nanog () gmail com> wrote:
On 25 November 2013 23:42, David Birdsong <david () imgix com> wrote:On Nov 25, 2013 1:51 PM, "Jason Pope" <boards188 () gmail com> wrote:------------------------------ Message: 2 Date: Sun, 24 Nov 2013 18:47:09 -0800 From: David Birdsong <david () imgix com> To: nanog () nanog org Subject: telnet into a netgear switch? Message-ID: <CAOMvUQfeM_Wnc=eS1vz0Gh_pp-vZ+sPRk9Td-1U0A34c3A6jdQ () mail gmail com>Content-Type: text/plain; charset=ISO-8859-1 Hey all, last night while at the datacenter I was in a pinch to extend a rack's LAN. I compromised and ran out to the local Fry's to buy whatever switch I could find so as to allow some configuration to happen while we wait for the real network gear to show up. I left before confirming I could access the switch remotely; it was very late and I was pretty groggy and hey, any network gear has to be telnet'table this day and age. Of course I was mostly wrong. The switch expects some signed payload before allowing a telnetthrough. Ifound this: https://code.google.com/p/netgear-telnetenable/...but I'm having a hell of a time getting anything to respond. The most confounding part is the switch doesn't respond to a single SYN packet on low ports. I'm scanning all the ports now, but if nothingshowsup, I'm not sure what a payload is good for if the switch doesn't ACK a single SYN. I'm curious if anybody's got any tips besides not using Netgear in the datacenter. I have the MAC, I've IP'd it via DHCP, and the model number: JGS524Eand Ican power cycle the switch as much as needed. P.S. long time listener, first time caller. i'm more of a sysadmin dangerously standing in for a proper network person. ------------------------------ Seems to me that you need to use their "Switch Configuration Utility" to manage the switch. I didn't read all the documentation, but that iswhatjumps out at me after a brief look. Maybe it will allow you to enable telnet or ssh from there. See the following link:No windows box handy, nor the desire for that hoop. ...but what magic is a windows app going to perform to wake up an unresponsive TCP stack?In view that the application needs to be run directly on the LAN, I'm not sure why you'd expect any TCP/IP like protocol - I asked a friend for a packet capture and it seems that the configuration utility is using RRCP ( http://en.wikipedia.org/wiki/Realtek_Remote_Control_Protocol).
t'was finding this that made reassured me towards TCP/IP: https://code.google.com/p/netgear-telnetenable/ but yes, i'd completely forgotten about other protocols. HTH
http://downloadcenter.netgear.com/en/product/JGS524E Jason
Current thread:
- telnet into a netgear switch? David Birdsong (Nov 25)
- Re: telnet into a netgear switch? Christopher Morrow (Nov 25)
- Re: telnet into a netgear switch? David Birdsong (Nov 25)
- Re: telnet into a netgear switch? Garrett Skjelstad (Nov 25)
- <Possible follow-ups>
- RE: telnet into a netgear switch? Jason Pope (Nov 25)
- RE: telnet into a netgear switch? David Birdsong (Nov 25)
- Re: telnet into a netgear switch? Pedro Cavaca (Nov 25)
- Re: telnet into a netgear switch? David Birdsong (Nov 25)
- Re: telnet into a netgear switch? Geraint Jones (Nov 25)
- Re: telnet into a netgear switch? Jason Pope (Nov 25)
- RE: telnet into a netgear switch? David Birdsong (Nov 25)
- Re: telnet into a netgear switch? Christopher Morrow (Nov 25)