RE: Switch designed for mirroring tap ports

["Slade, Ian" <IAN.SLADE () saic com>]

Yes, the Cat 6500s are limited to a certain number of SPAN/port
monitoring sessions.

Another tool, we've switched to after using the Gigamon for many years
are taps and the Anue 5236 (10Gb) port aggregator.  From this we can
split the SPAN feeds into different IDS/monitoring servers or load-share
among several output servers.  It is a great tool and very easy GUI to
control the feeds and output ports.


Ian Slade
Sr. Network Engineer, SAIC ITS Systems Engineering
ian.slade () saic com  703-676-5234  http://www.saic.com


-----Original Message-----
From: nanog-bounces+ian.slade=saic.com () nanog org
[mailto:nanog-bounces+ian.slade=saic.com () nanog org] On Behalf Of A.
Pishdadi
Sent: Thursday, March 01, 2012 3:54 AM
To: gwood83 () gmail com
Cc: NANOG
Subject: Re: Switch designed for mirroring tap ports

No the issue isnt monitoring many ports at once, its having more then 1
set of monitoring or 2 sets in the 6500 case. So I am monitoring say
port channel 1 to ports 1 2 3 4, and port channel 2 , ports 4 5 6 and 7.
After that I cannot monitor anymore ports.

On Thu, Mar 1, 2012 at 2:34 AM, gwood83 () gmail com <gwood83 () gmail com>
wrote:

> Instead of monitoring the physical interface, monitor the vlan from a 
> Cisco IOS perspective on a CAT6500.  This will capture all physical 
> interfaces associated with that vlan for mirroring/span.
>
> HTH
>
> Jonathan
> #22744
>
> Sent from my HTC on the Now Network from Sprint!
>
>
> ----- Reply message -----
> From: "A. Pishdadi" <apishdadi () gmail com>
> Date: Wed, Feb 29, 2012 11:12 pm
> Subject: Switch designed for mirroring tap ports
> To: "NANOG" <nanog () nanog org>
>
> Hello All,
>
> We are looking for a switch or a device that we can use for mirroring 
> tap ports. For example , take a mirror port off of a core router say a

> 6509, connect it to a port on said device, say port 1. I would like 
> then to be able to mirror port 1 on said device to multiple ports,  
> like port 2 , 3, 4. We have the need to analyze traffic from one port
on multiple devices.
> Seems most switches are limited to mirroring to a max of 1 or 2 ports.
>
>
> Any suggestions would be great.
>
> Thanks,
> Ameen