Re: quietly....

[Lamar Owen <lowen () pari edu>]

On Wednesday, February 02, 2011 03:55:30 pm Iljitsch van Beijnum wrote:
> You can do that today. For instance, this is what I have in a test setup. (However, the ISC dhcpd can only do either 
> v4 or v6, not both at the same time.)

First, thanks for taking the time to reply.  That is appreciated.

With the op hat on...... I want to dual-stack DHCP with complete feature parity, and it be done with one DHCP server.  
The only thing I should, speaking as an operator, have to do is add the IPv6 stanzas to the working v4 config, restart, 
and dualstack DHCP Just Works.  

If I have to hack the code myself to do it..... (and, while I might not, someone will, standards or no standards.  "If 
it don't work, make it work.").

> > Instead, I'll have to completely relearn how dynamic allocation works, learn about and protect against a new attack 
> > vector
>
> You also get to stop worrying about a few old ones.

As long as there's a dual stack, the vectors for v4 will work against the v4 portion of the stack.  So, no, it ends up 
adding things to an already crowded plate.

> I did this for routing. I can explain everything you need to know about how to run IPv6 BGP, RIP and OSPF in an hour 
> and a half. Did that at a RIPE meeting some years ago. Setting up Apache to use IPv6 is one line of config. BIND two 
> or three (not counting IPv6 reverse zones).

Now, taking the op hat off for a moment, and stepping down from the soapbox, this is something that could be useful; 
has this talk been recorded and/or transcribed?  If so, that's a useful resource, and, an hour and a half of relevant 
material is much easier to swallow than some of the books out there.

If a book like Geoff Huston's excellent 'ISP Survival Guide' but for IPv6 (Hey, Geoff, is there an IPv6 version of your 
book?) were out there..... I know my 1999 edition of that book has seen plenty of use, mostly by people I loaned it out 
to when they asked me 'how does this thing called the Internet work?'

A point-by-point "here's how you do in v6 that you're doing in v4" and "how to overlay your v6 subnets on RFC1918 
NATted addresses without forklift upgrades in 12 easy steps"  you might have an audience, as long as the first line of 
the book isn't "Everything you know is wrong."

Even papers on how to rework your IPv4 network to more easily transition to dual-stack would be helpful (and those are 
probably out there; anybody got a cluepon page set up yet for those resources?)

> There are some good books on running IPv6, you know.  :-)

I know.  My book budget got cut almost completely out last year, as well as the budget for more bookshelves and floor 
space, so I'll have to finance those by selling off old ones.  Anybody want a CiscoPress ATM book or ten?

:-)